30 June 2021 in Eastern-European Journal of Enterprise Technologies
It is shown that the technical condition of condensing devices of steam turbines largely determines the amount of electricity losses, reliable and economical operation of NPP units. Analysis of the heat transfer process in the condenser showed that the main causes of load reduction are determined by rising cooling water temperature and deviation of steam pressure from normal value. It is shown that among diagnostic parameters except leakage volumes there must be an assessment of contamination of the heat transfer surface which significantly affects the reduction of electricity generation. The modernization main points of the condenser of the Zaporizhzhya NPP power unit No. 3 on the principle of "block-modular" design developed by PJSC "Turboatom" and the characteristics of the condenser provided by the new design are considered. To reflect the real mode of operation of the condensing unit, it is proposed to model the contamination of the heat exchange surface and the presence of leakages in the condenser space using the method of thermal calculation of the condenser by iterative methods. It was found that reducing the increase in electricity generation as a result of the effects of the study factors can partially or even completely absorb the effect of upgrading the condenser plant. It will provide a significant increase in electricity generation with relatively low capital investment compared to construction of new NPP power units and improve the accuracy of power generation forecasts.
5 July 2024 in Bulletin of the National Technical University "KhPI". Series: Energy: Reliability and Energy Efficiency
АЗАнатолій Петрович Заболотний
Анатолій Петрович Заболотний
+1
It is noted that although the share of renewable electricity sources continues to grow and develop rapidly, the industry still faces many challenges, including how to continue to reduce electricity losses and annualized costs, improve operation and maintenance efficiency, maintain grid stability, ensure safety and reliability of the power supply system containing renewable sources of electrical energy. It is shown that an effective solution to these problems is possible only on the basis of the analysis of the prospects for the development of local electric power systems that contain renewable sources of electric energy, the development of technical and organizational support mechanisms that will contribute to the construction of modern system (schematic) solutions. It is proposed to apply the potential surface method for building the optimal structure of the rural electrical network during its design and modernization in the presence of renewable sources of electrical energy, which allows optimizing the structure of the network from the point of view of electrical energy losses and reducing annualized costs. The algorithm for forming the structure of power supply systems is described, which implements the simultaneous solution of the tasks of determining the number of load nodes, distributing electrical receivers between them, determining the design of power sources, taking into account the discreteness of the design of system elements. The results of numerical modeling based on the proposed algorithm are presented on the example of solving the problem of reconstruction of a section of the rural electricity network.
22 June 2022 in POWER ENGINEERING: economics, technique, ecology
The paper shows that the technical condition of condensing devices of steam turbines largely determines the amount of electricity losses, reliable and economical operation of NPP units, and the modernization of steam turbine capacitors will provide a significant increase in electricity generation with relatively low capital investment compared to construction of new NPP power units. Analysis of the perfection of the heat transfer process in the condenser according to the principles of thermoeconomic diagnostics to identify the causes of abnormal operation of the power conversion system showed that the main causes of load reduction are determined by rising cooling water temperature and deviation of steam pressure from normal assessment of contamination of the heat transfer surface, which significantly affects the reduction of electricity generation. The modernization main points of the capacitor of the Zaporizhzhya NPP power unit № 3 on the principle of "block-modular" design developed by PJSC "Turboatom" and the characteristics of the capacitor provided by the new design are considered. The method of thermal calculation of the condenser with the use of iterative methods, which takes into account the presence of air leakage in the space of the condenser and the appearance of contamination of the heat exchange surface, is given. The increase of electric power at the generator terminals at change of steam load factor and pollution thickness is calculated and analyzed. An analytical dependence of the investigated parameters of reducing the increase in electric power during the modernization of the capacitor is obtained and the interpretation of the results is carried out. The work emphasizes the importance of processing the results of diagnostics and monitoring of the technical condition of steam turbines condensing devices and information about their impact on the amount of electric power generation.