30 September 2025 in Science and Technology of Kazakhstan
Мақалада ортадан тепкіш сорғы агрегаттарының дірілдік параметрлерін талдау негізінде жабдықтың техникалық күйін бағалау нәтижелері қарастырылған. Осы зерттеу шеңберінде ортадан тепкіш сорғы агрегаттарының діріл параметрлері бойынша диагностикалық ақпаратты іріктеу пайдаланылды. Өндірістік жағдайда ортадан тепкіш сорғыларға дірілдік диагностика жүргізу әдістемесі сипатталған. Сорғы агрегаттарының техникалық күйін зерттеу үшін электрқозғалтқышының мойынтіректері мен сорғы дөңгелегінің жетек біліктері таңдалған. Сонымен қатар диагностика жүргізуге арналған анализаторды пайдалану, діріл датчиктерін орналастыру реті баяндалған. Діріл анализаторының көмегімен айналмалы машиналар мен механикалық құрылымдардың діріл параметрлерін олардың техникалық күйін диагностикалау мақсатында талдау функцияларын орындайды. Жұмыс істеп тұрған ортадан тепкіш сорғылардың мойынтірек тораптарының діріл жылдамдығының спектрлері анализатордың көмегімен тіркеліп діріл сигналдарын өңдеу үшін сигналдың жиілік құрамын анықтауға мүмкіндік беретін тікелей спектр (автоспектр) және діріл сигналының конверттік спектрі әдістері қолданылды. Автоспектр графиктеріндегі діріл сигналының гармоникалық компоненттері ақаулардың болуын көрсетеді және сорғы жабдықтарын жүйелі бақылауды қажет етеді. Жүргізілген зерттеулер ортадан тепкіш сорғы агрегаттарының техникалық күйін бағалау мен болжаудың бірыңғай диагностикалық критерийін құруды қамтамасыз ететін діріл параметрлері бойынша бағалаудың негізгі диагностикалық белгілерін қалыптастыруға мүмкіндік берді. Кілтті сөздер: ортадан тепкіш сорғы, діріл диагностикасы, діріл анализаторы, сорғы қондырғыларын бақылау, деректерді визуализациялау, автоспектр, спектрлік талдау.
1 December 2021 in Mining of Mineral Deposits
Purpose. Search for the possibility of increasing the efficiency of dredge pumps for viscous fluids by determining the rational values of the blade-outlet inclination angles in the pump impellers. Methods. During the research, the following is used: theoretical studies of the structure of the viscous fluids flowing through the flow part of dredge pumps; the method of three-dimensional software-simulation modeling of hydrodynamic processes using the Ansys software package; the methods of rational experiment planning for selecting the values of the number of points in the computational grid when optimizing the geometric parameters of the dredge pump impellers; methods of mathematical statistics and correlation analysis. Findings. It has been proven that the main reason for the failure of the flow part components in the dredge pumps is the manifestation of the influence of cavitation processes, which can be eliminated by changing the blade-outlet inclination angles in the pump impellers. A software-simulation complex for the automated design of the flow parts in the dredge pumps has been developed based on the use of optimization algorithms and computational fluid dynamics methods, which makes it possible to design dredge pumps with optimal characteristics that ensure their efficient operation with maximum efficiency values. It has been determined that one of the main factors influencing the head developed by dredge pumps and the efficiency value is the blade-outlet inclination angle in the pump impellers. Originality. Scientific novelty is in the scientific substantiation and development of a simulation-mathematical method for calculating the geometric parameters of the flow part in dredge pumps for viscous fluids at the design stage. Practical implications. The developed method for determining the rational blade-outlet inclination angles of the impellers in the dredge pumps for viscous fluids can be recommended to scientific-research and industrial organizations for use in the improvement, design and operation of the dredge pumps.
16 March 2025 in International Journal of Innovative Research and Scientific Studies
The aim of the study is to create a unified diagnostic criterion suitable for the effective assessment of the current condition of pumping equipment and for predicting the development of degradation processes. The article addresses issues related to vibration diagnostics and the evaluation of the technical condition of pump units. As part of the research, a sample of diagnostic data based on the vibration parameters of centrifugal pump units was used. The methodology for conducting vibration diagnostics on operating equipment using a vibration analyzer is described. To process the vibration signals, methods of direct spectrum analysis (autospectrum) and envelope spectrum analysis were applied, allowing for the determination of the signal's frequency components. The results of spectral analysis of the vibration signals from the bearing assemblies of the centrifugal pump unit are presented. The scientific novelty of the research lies in the development of a digital monitoring system for the operation of pump units, which represents an important step towards increasing the efficiency and reliability of pumping equipment. As a result of the study, fundamental diagnostic features for assessing the technical condition based on vibration parameters were developed, making it possible to create a unified diagnostic criterion for the assessment and prediction of the condition of centrifugal pump units.
1 January 2025 in Bulletin of L.N. Gumilyov Eurasian National University. Technical Science and Technology Series
The article discusses methods for diagnosing the technical condition of pumping units using a thermal imager in the operating conditions of JSC NAC KazAtomprom. In the framework of this study, we used a sample of diagnostic information obtained by thermal imaging examination of SULZERcentrifugal pumping units subject to a technical condition assessment procedure. A technique for conducting thermal imaging diagnostics on existing equipment is described. To analyze the dataobtained, thermogram processing methods were used to identify areas of local overheating, indicatingpotential defects. The results of thermal imaging analysis of bearing assemblies of pumping units are presented. The conducted studies have made it possible to form basic diagnostic signs for assessing the technical condition based on thermal characteristics, which ensures the creation of a single diagnosticcriterion for assessing and predicting the condition of centrifugal pumping units. The results obtained demonstrate the high efficiency of the thermal imaging method for earlydetection of malfunctions and assessment of the remaining life of the equipment. This, in turn, helps to improve the reliability of pumping units, reduce the risk of accidents and optimize maintenanceregulations. The presented methodology can be recommended for widespread implementation inenterprises with a similar type of equipment, as well as used in a technical condition monitoring systemwithin the framework of the predictive maintenance concept.
30 August 2024 in Neft i Gaz
UUURAL STATE AGRARIAN UNIVERSITY
URAL STATE AGRARIAN UNIVERSITY
This article discusses the issues of increasing the efficiency of operation of pumping units by improving the methodology for calculating its reliability, using the example of centrifugal pumping units of the CM type used for pumping petroleum products. The proposed monitoring system makes it possible to obtain data on controlled centrifugal pumping units using a sufficient number of measuring channels to which vibration, temperature and pressure sensors are connected. Controlled parameters can be visualized, i.e. You can graphically represent the changes over different time intervals. The proposed monitoring system also provides recommendations for troubleshooting the centrifugal pumping unit according to sensor readings.