1 January 2021 in AIP Conference Proceedings
Hydroxyapatite (HA; Ca10(PQ4)6(QH)2) is a well-known bioceramic material that has been widely applied as a tissue engineering due to its bioactive properties and high biocompatibility level. Its crystal structure enables another ions substitution possibly to be doped with various elements. Zinc (Zn) is an important element that has a stimulation effect on bone formation in vitro and in vivo and an inhibitory effect on bone resorption. Those combinations, HA/Zn, have been arisen extensively to be researched for excelling properties. In this study, Zn incorporated hydroxyapatite was synthesized using a hybrid method that is a sol-gel method followed by microwave radiation assisted. This method was employed to improve HA/Zn formation resulting in high crystallinity. The synthesized samples were characterized by using X-Ray Diffraction Method (XRD), Fourier-Transferred Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), and Energy Dispersive Spectroscopy (EDS). The XRD results showed that the parashcolzite phase was identified in the samples with Zn addition. It implied that calcium ions had been successfully replaced by zinc ions partly. Also, the crystallinity of HA/Zn increased with the increasing Zn amount without affecting hydroxyapatite formation, confirmed by the FTIR result. The highest crystallinity, 76.14 %, was achieved in a sample with 15 wt% of Zn. The morphology has a round shape with tend to agglomerate by increasing the concentration of Zn. It also altered the Ca/P ratio resulting in the formation of non-stoichiometry HA (nHA).
18 June 2021 in Eastern-European Journal of Enterprise Technologies
The development of potential alternative binders to Portland cement is still becoming a global challenge in housing and infrastructure aspects. That is because cement and concrete become the major materials needed in building constructions. The Ordinary Portland cement can form a solid and hard mass when mixed with water with a certain ratio. This is due to the formation of ettringite and calcium silicate hydrate (CSH) phases that contribute to the strength of the hydrated products about 33–53 MPa. However, the manufacturing temperature of Portland cement can reach up to 1,500 °C in producing clinker. In order to lower the energy consumption and production cost, scientists were trying to utilize pozzolanic materials. The research of pozzolanic materials as alkali-activated cement, such as soil cement or geopolymer cement, is also still conducted. Hence, a better understanding of pozzolanic reaction and its hydration products is needed. In this work, the hydration products of low-energy binders composed of Ca(OH)2-SiO2 and Ca(OH)2-metakaolin-gypsum mixtures were studied. The hydrated products of 41 wt. % Ca(OH)2 – 41 wt. % metakaolin – 18 wt. % gypsum mixtures followed by water immersion curing at 50 °C for 28 days undergone a pozzolanic reaction. XRD characterization showed that the hydrated product is mainly composed of ettringite (60.0 %) and crystalline-CSH (23.4 %). The diffractograms obtained have shown a specific hump indicating the presence of amorphous phases besides the crystalline. To confirm the presence of the non-crystalline or amorphous phases of the hydrated products, a polarizing optical microscope (OM) using a crossed Nicols method was used. The characterization of the phases is the novelty of the present research. The ettringite, crystalline CSH and the amorphous phases act as a strong binder that consequently contribute to its average maximum compressive strength of 22.17 MPa.
1 August 2019 in IOP Conference Series: Materials Science and Engineering
Various species of Bamboo is widely available in Indonesia. Usually it is used as pillars, roof frame, and for walls in a woven form and it can be used for steel substitute in reinforced concrete. In making bamboo as a strengtheners or reinforcement a proper volume fraction should be chosen. Besides that, the minimum distance between bamboo bars or inter-strengtheners distance must be determined so that the reinforcement effect on cement matrix takes place. Ten variations of mixtures were used in this research. The number and distance between reinforce bars and its arrangement perpendicular or parallel with loading direction. From the observation it is found that both of the vertically and horizontally arranged bamboo bars at minimum inter-strengtheners distance of 10 mm gave maximum reinforcement and the flexural strength are 16.1 ± 0.3 MPa and 15.8 ± 0.6 MPa. Whereas cement only sample gave 7.2 ± 0.6 MPa hence 2 folds increase. For distance less than 10 mm, the flexural strength is lower, even volume fraction is relatively high and it supposed to give higher strength, in fact this is due to composite reinforcement effect did not occur and this is belief due to a hindered hydration process.
1 August 2019 in IOP Conference Series: Materials Science and Engineering
In this work, Cr-ZrO2 composite coating were prepared by electrodeposition method on aluminium substrate from chromic acid based electrolytes containing gelatin. The effect of gelatin on the corrosion resistance of Cr-ZrO2 coatings were studied in 3 wt.% sodium chloride solutions. Potentiodynamic polarization studies were performed using a Versastat 3 (Princeton Applied Research) electrochemical system with a three-electrode cell. Results shows that the corrosion resistance of Cr-ZrO2 coating on Al substrate was improved by the addition of gelatin to the coating solution. The addition of gelatin shifted the potentiodynamic polarization curved in the noble direction. The corrosion potential changed positively from -778 mV to -259 mV. The corrosion rate of Cr-ZrO2 coating decreased from 4.44±0.93 mpy to 0.13±0.01 mpy with the addition of 3g/L gelatin.