Electrostatic capacitors are foundational components of advanced electronics and high-power electrical systems owing to their ultrafast charging-discharging capability. Ferroelectric materials offer high maximum polarization, but high remnant polarization has hindered their effective deployment in energy storage applications. Previous methodologies have encountered problems because of the deteriorated crystallinity of the ferroelectric materials. We introduce an approach to control the relaxation time using two-dimensional (2D) materials while minimizing energy loss by using 2D/3D/2D heterostructures and preserving the crystallinity of ferroelectric 3D materials. Using this approach, we were able to achieve an energy density of 191.7 joules per cubic centimeter with an efficiency greater than 90%. This precise control over relaxation time holds promise for a wide array of applications and has the potential to accelerate the development of highly efficient energy storage systems.
18 December 2020 in ACS Applied Materials & Interfaces
The performance of photoelectrochemical water splitting (PEC-WS) over time was drastically improved using new carrier-guiding semiconductor nanostructures, namely InGaN/GaN core–shell nanowires (CSNWs) with a protruding core, as a photocathode (PC) material. The InGaN/GaN CSNWs designed in this study enable photo-generated electrons to accumulate at the interface between the InGaN core and the GaN shell from where they move toward the upper region of the InGaN/GaN CSNWs, and consequently transfer to the electrolyte. As a result, the PEC-WS performance could be significantly improved. The current density and applied-bias photon-to-current efficiency of the PC were measured to be 28.25 mA cm−2 and 7.07% at −1 and −0.9 V versus a reversible hydrogen electrode, respectively, which are much higher than previously reported values. The current density and hydrogen gas that was generated increased significantly with increasing reaction time and were measured to be 117.04 mA cm−2 and 22.15 mmol cm−2, respectively, after ten hours of PEC-WS. This behavior differs considerably from the significant degradation in the PEC-WS performance over time reported previously. Moreover, the total amount of hydrogen was evaluated as being sufficient to enable the PEC-WS technology to be applied in practice.
31 March 2022 in Applied Science and Convergence Technology