24 June 2024 in Energy & Environmental Science
Anthropogenic ammonia production has sustained exponential population growth but exacerbated wastewater nitrate pollution. Abundant nitrate can be refined to purified nitrogenous chemicals through the electrochemical nitrate reduction reaction (NO3RR). However, the dilute and impure composition of nitrate-bearing wastewaters presents barriers to practical electrocatalytic systems. We address these barriers in our investigation of the model ammonia-selective homogeneous molecular NO3RR catalyst Co(DIM) in real wastewater and reactive separations architectures. In this work, we elucidate catalysis inhibition mechanisms imposed by magnesium in real wastewaters that decrease nitrate conversion activity by 62.0%. These mechanisms informed our design of electrocatalyst-in-a-box (ECaB), a novel NO3RR reactive separation that exhibits the lowest reported energy consumption for purified wastewater-derived ammonia production (90.0 ± 2.7 kW h kg N−1). Engineering ECaB's subunit processes enhanced the rate of ammonia production by 20.4×. This work demonstrates a use-informed engineering approach that iterates between mechanistic insights and unit process-level performance of electrochemical wastewater refining systems in complex aqueous streams.
1 February 2025 in Journal of the Electrochemical Society
DEDenise Crocce Romano Espinosa
Denise Crocce Romano Espinosa
Lithium (Li) is considered a critical material because of growing Li-ion battery demand and 90% of global production occurring in Australia, Chile, and China. Li-ion (Li+) extraction from brine uses large areas for evaporation and precipitation. Membrane separation can extract lithium with minimal water losses. However, the effect of brine composition on Li+ transport across different commercial membranes in electrodialysis (ED) separations remains a pressing knowledge gap. This study aimed to evaluate co-occurring ion effects (Na+, Mg2+, Ca2+) on ED Li+ extraction using different commercial membranes. Li+ extraction performance was evaluated for varying current densities in binary solutions using a single-stack ED cell comprised of a standard anion exchange membrane and either a standard cation exchange (CEM), monovalent-selective CEM, or nanofiltration (NF) membrane. Li+ selectivities were highest for the monovalent-selective CEM, followed by NF and then standard CEM. Monovalent contaminants remain an extant challenge for Li+ extraction using all membranes tested. Selectivity factors for Li+ over divalent cations reached 6.8 (SLi/Mg) and 56.7 (SLi/Ca) at 2.8 mA cm−2 for the monovalent-selective CEM. These divalent separation factors were achieved without Ca precipitation/fouling; Li+/Mg2+ and Li+/Ca2+ ratios increased from 0.5 in the feed (for both ions) to 5.0 and 3.5 in the permeate.
23 December 2024 in Industrial & Engineering Chemistry Research
8 February 2024 in ChemRxiv
Haber-Bosch ammonia production and utilization has sustained exponential population growth but exacerbated wastewater nitrate pollution. Abundant nitrate pollutants could be refined to purified nitrogenous chemicals with the electrochemical nitrate reduction reaction (NO3RR). However, the dilute and impure composition of nitrate-rich wastewaters presents barriers to realizing practical electrocatalytic systems that to date operate most efficiently in concentrated, pure electrolytes. These barriers inform our investigation of the ammonia-selective homogeneous molecular NO3RR catalyst Co(DIM). In this work, we elucidate interfacial mechanisms of catalysis inhibition that describe Co(DIM)-mediated NO3RR performance in complex electrolyte compositions. These mechanisms inform design principles for a novel reactive separations platform, electrocatalyst-in-a-box (ECaB), that exhibits the lowest reported energy consumption for purified ammonia production from a real wastewater (90.0 ± 2.7 kWh kg-N–1). This work demonstrates a use-informed design approach that iterates between mutually informative mechanistic insights and performance of electrochemical wastewater refining systems in complex aqueous streams.
12 August 2025 in ChemRxiv
Reactive separations systems that leverage the nitrate reduction reaction (NO3RR) promise to extract value from nitrate-laden wastewater treatment by refining nitrate pollutants into ammonia products. Despite recent fundamental advances in NO3RR electrocatalysis and some proof-of-concept demonstrations of promising reactive separations unit processes, a rational approach to scale-up and deployment of these critically needed technologies remains elusive. This imperative is challenged by the impure and variable nature of nitrate-laden wastewaters. To address these challenges, and to narrow the broad engineering design space for electrocatalytic nitrate refining (that necessarily includes integrated processes for nitrogen extraction, conversion, and recovery), we pursue process modeling that bridges subunit kinetic behavior with overall process performance. In this work, we establish characteristic rate equations for the subunit processes that comprise a reactive separation called electrocatalyst-in-a-box (ECaB), which facilitates nitrate reduction in an engineered environment separate from wastewater. Integrating these equations into a continuous ECaB process model predicts performance and lays the groundwork for further optimization toward practical application in wastewater treatment. The model also enables technoeconomic analysis that facilitates comparison of component- and subunit process-level cost contributions to the overall system and provides a benchmark for reactive separations against conventional wastewater nitrogen treatment. In sum, this work provides a framework to translate fundamental unit process studies toward integrated reactive separation system design, and to uncover unit process insights within the context of an integrated system to prioritize research and development needs in membrane, catalysis, and reactor design research.
17 July 2026 in Journal of the American Chemical Society