2 June 2018 in Journal of Petroleum Exploration and Production Technology
Exploration and drilling operations are the most costly and risky activities that require logging while drilling effective tool operation and high speed real-time data transmission. Among other logging technologies, mud pulse telemetry has been widely adopted into real-time drilling and logging data measurements for deep formation evaluation decision-making. However, the increased downhole information quantity and quality requirements have elevated demands for greater bandwidth and higher data rate transmission. Maximum possible mud pulse telemetry data rates are obstructed by unpredictable signal impairments. Researchers have implemented numerous downhole signal modulation techniques, data compression algorithms and surface receiver noise cancellation techniques to lower bit errors and increase signal-to-noise ratio. This study reviews mud pulse telemetry system signal transmission challenges and current countermeasure trends. Rigorous technical literature reviews from exploration and drilling oilfield service industry have been at the receiving end debated. Mud channel signal characteristics, signal attenuation factors, signal detection and decoding techniques are critical to successful mud pulse operations. To minimize exploration, drilling and economic risks, this study explores mud pulse data transmission challenges, strategies and possible technical solutions to the next generation engineers and scholars in the field.
21 June 2018 in Journal of Sensors
The logging while drilling (LWD) electromagnetic weak signal detection model of a Duffing oscillator based on a one-dimensional nonlinear oscillator is established. The influences of noise on Duffing oscillator dynamic behavior of periodic driving force are discussed and evaluate the oscillator weak signal detection mechanism based on a phase change trajectory diagram. The improved Duffing oscillator is designed and applied to detect the electromagnetic logging signal resistivity at the drill bit using the time-scale transformation method. The simulation results show that the nonlinear dynamic characteristics of the Duffing oscillator are very noticeable, the Duffing circuit is very sensitive to detect the tested signal, and it has a reasonable level of immunity to noise. The smaller the amplitude of the tested signal, the more sensitive the circuit is to the signal, the better the antinoise system performance, and the lower the signal-to-noise ratio (SNR).
13 February 2018 in Journal of Ambient Intelligence and Humanized Computing