Over the years, plastic water bottle manufacturing, especially PET (Polyethylene terephthalate) bottle has been steadily increasing due to its toughness, transparency, and chemical properties. However, most manufacturers have to spare time, and cost, verifying their prototypes in accordance to the Thai Industrial Standard (TIS) before any mass production can start. This paper aims to overcome some of these problems by using Finite Element Method (FEM) to study bottle mechanical properties, particularly maximum stress and deformation that can be employed to evaluate performance and optimal thickness. From simulation results the optimal thickness of a 6-liter bottle, that its maximum stress can still be kept under critical value, is 0.45 mm. The thinner and lighter bottle reduces the amount of material usage. The FEM simulation also speeds up and alleviates some necessary testing procedures in a prototype designing process.
Internet of Things (IoT) technology has been applied in many sectors that require real-time or historical information. For example, monitoring the data and getting timely information in research is necessary for the food refrigeration industry. Therefore, a system for measuring a small refrigerator's temperature and relative humidity was developed to study the performance of a wireless communication system, along with a demonstration of its application to connect to the IoT cloud system. This wireless communication system consisted of a wireless sensor network (WSN) and gateway (GW) using ZigBee and Narrowband Internet of Things (NB-IoT). Additionally, this connection to the IoT cloud platform has been used in various cooling types, including air-cooling refrigerators and water-cooling refrigerators. For the experimental results, the ambient temperatures of the refrigerator testings inside and outside the room were 30 and 35 °C, respectively. The beverage cans were set as a cooling load for comparing the temperature and humidity variations over the operating time. It was found that the IoT system could monitor the real-time surroundings both inside and outside the room. The effect of cooling changes from pre-cooling to a steady state has also been discussed. Thus, the IoT system can implement cooling monitoring systems for pelter-based mini refrigerators.