1 December 2014 in Current Opinion in Colloid & Interface Science
26 July 2023 in Soft Matter
We report foam coarsening studies which were performed in the International Space Station (ISS) to suppress drainage due to gravity.
31 July 2017 in Soft Matter
Liquid foams are unstable due to aging processes such as drainage, coalescence or coarsening. Since these processes modify the foam structure, they can be a severe limitation to the elaboration of solid foams with controlled structures inherited from their liquid precursors. Such applications call for a thorough understanding of foam stabilization. Here we study how coarsening can be inhibited by the combined effects of a mixture of gas containing a species insoluble in the foaming solution and of gelation of the foaming solution. We present experiments with model ordered liquid foams and hydrogel foams. They allow us to identify the underlying physical mechanisms of stabilization and their governing parameters, namely the bubble radius Ro, the foam shear modulus G and the number ηo of insoluble trapped gas molecules per bubble. We propose a scaling model that predicts the stability diagram of an ideal monodisperse perfectly ordered foam as a function of Ro, G and ηo, in qualitative agreement with our data. We show that the domain of stable foams is governed by a characteristic elasto-capillary radius set by the ratio of surface tension to storage modulus.
14 September 2023 in Proceedings of the National Academy of Sciences
Coarsening of two-phase systems is crucial for the stability of dense particle packings such as alloys, foams, emulsions, or supersaturated solutions. Mean field theories predict an asymptotic scaling state with a broad particle size distribution. Aqueous foams are good model systems for investigations of coarsening-induced structures, because the continuous liquid as well as the dispersed gas phases are uniform and isotropic. We present coarsening experiments on wet foams, with liquid fractions up to their unjamming point and beyond, that are performed under microgravity to avoid gravitational drainage. As time elapses, a self-similar regime is reached where the normalized bubble size distribution is invariant. Unexpectedly, the distribution features an excess of small roaming bubbles, mobile within the network of jammed larger bubbles. These roaming bubbles are reminiscent of rattlers in granular materials (grains not subjected to contact forces). We identify a critical liquid fraction, above which the bubble assembly unjams and the two bubble populations merge into a single narrow distribution of bubbly liquids. Unexpectedly,is larger than the random close packing fraction of the foam. This is because, betweenand, the large bubbles remain connected due to a weak adhesion between bubbles. We present models that identify the physical mechanisms explaining our observations. We propose a new comprehensive view of the coarsening phenomenon in wet foams. Our results should be applicable to other phase-separating systems and they may also help to control the elaboration of solid foams with hierarchical structures.
19 November 2012 in Soft Matter
We study the impact of interfacial rheology on the linear viscoelastic relaxations of disordered 3D foams. Their complex shear modulus G* = G′ + iG′′ is measured as a function of frequency, bubble size, liquid viscosity and surface dilatational modulus. We show that for foams with very rigid interfaces the variations of G* with frequency f between 1 and 100 Hz deviate from the behavior previously predicted as a generic consequence of topological disorder and observed for foams with mobile or moderately rigid interfaces. Our experiments demonstrate that the relaxations slow down as the bubble size or the foaming liquid viscosity increases. We show under which conditions, depending on the interfacial rigidity, the loss factor G′′/G′ can be collapsed on master curves by applying a scale factor to the frequency. The dependence of this scale factor on the bubble size and viscosity constitutes a robust criterion helping to identify the dominant dissipation mechanism.
26 September 2014 in Soft Matter
We study the wall slip of aqueous foams with a high liquid content. We use a set-up where, driven by buoyancy, a foam creeps along an inclined smooth solid wall which is immersed in the foaming solution. This configuration allows the force driving the bubble motion and the bubble confinement in the vicinity of the wall to be tuned independently. First, we consider bubble monolayers with small Bond number Bo < 1 and measure the relation between the friction force F and the bubble velocity V. For bubbles which are so small that they are almost spherical, the friction law F ∝ V is Stokes-like. The analysis shows that the minimal thickness of the lubricating contact between the bubble and the wall is governed by DLVO long-range forces. Our results are the first evidence of this predicted linear friction regime for creeping bubbles. Due to buoyancy, large bubbles flatten against the wall. In this case, dissipation arises because of viscous flow in the dynamic meniscus between the contact film and the spherical part of the bubble. It leads to a non-linear Bretherton-like friction law F ∝ V2/3, as expected for slipping bubbles with mobile liquid–gas interfaces. The Stokes-like friction dominates for capillary numbers Ca larger than the crossover value Ca* ∼ Bo3/2. The overall friction force can be expressed as the sum of these two contributions. On this basis, we then study 3D foams close to the jamming transition with osmotic pressures Π small compared to the capillary pressure Pc. We measure the wall shear stress τ as a function of the capillary number, and we evidence two friction regimes that are consistent with those found for the monolayer. Similarly to this latter case, the total shear stress can be expressed as the sum of the Stokes-like friction term τ ∝ Ca and the Bretherton-like one τ ∝ Ca2/3. However, for a 3D foam, the crossover at a capillary number Ca** between both regimes is governed by the ratio of the osmotic pressure to the capillary pressure, such that Ca** ∼ (Π/Pc)3/2.