11 March 2020 in Nuclear Fusion
The effect of electron cyclotron heating (ECH) and electron cyclotron current drive (ECCD) on energetic-particle (EP)-driven magnetohydrodynamic (MHD) modes is studied in the helical devices LHD, TJ-II and Heliotron J. We demonstrate that EP-driven MHD modes, including Alfvén eigenmodes (AEs) and energetic particle modes (EPMs), can be controlled by ECH/ECCD. In the LHD device, which has a moderate rotational transform and a high magnetic shear, co-ECCD enhances toroidal AEs (TAEs) and global AEs (GAEs), while counter-ECCD stabilizes them, which improves the neutron rate compared with the co-ECCD case. Counter-ECCD decreases the core rotational transform and increases the magnetic shear, strengthening the continuum damping on the shear Alfvén continua (SAC). In the TJ-II device, which has a high rotational transform, moderate magnetic shear and low toroidal field period, helical AEs (HAEs) appear when the HAE frequency gap of the SAC is changed by counter-ECCD combined with a bootstrap current and neutral-beam-driven current. On the other hand, both co- and counter-ECCD are effective in stabilizing GAEs and EPMs in the Heliotron J device, which has a low rotational transform and low magnetic shear. The experimental results indicate that the magnetic shear has a stabilizing effect regardless of its sign. Modeling analysis using the FAR3d code shows that the growth rates are reduced by both co- and counter-ECCD in Heliotron J, reproducing the experimental results. ECH only affects EP-driven MHD modes, and the experimental results show that the effect depends on the magnetic configuration. In Heliotron J, some modes are stabilized with an increase in ECH power in the low-bumpiness magnetic configuration, while some modes are destabilized in the high- and medium-bumpiness magnetic configurations.
22 December 2004 in Journal of Nuclear Materials
3 June 2019 in Plasma Physics and Controlled Fusion
A hydrogen cryogenic pellet injection system was fabricated and applied to high-density experiments in a Heliotron J device. The fueling through pellet injection was conducted in Heliotron J by using an injection barrel with a tapered structure for a small pellet with low speed. A single pellet with a speed of 260 ± 30 m s −1 and a typical size of 1.1–1.2 mm was injected into NBI + ECH plasmas and NBI-only plasmas. In both cases, a significant increase in electron density was observed upon pellet injection. The increase in line-averaged electron density due to pellet injection was 4.0 ± 0.7 × 10 19 m −3 in both cases. Pellet fueling leads to high stored energy in the high-electron-density regime. A peaked electron density profile with high core density is obtained in NBI-only plasmas after pellet injection, while the edge density is kept at a lower level. An innovative H
α
array measurement shows that the pellet has penetrated into the magnetic axis in NBI + ECH plasmas, while the penetration depth in NBI-only plasmas is beyond the magnetic axis, which is deeper than that in NBI + ECH plasmas. The difference in penetration depth cannot be explained by the simulation results of the ablation code, in which the effect of fast electrons/ions on pellet ablation is not considered. These results suggest that the effect of fast electrons/ions should be taken into account in the ablation code in order to explain the present experimental results.
1 October 2010 in Review of Scientific Instruments
A tangential Fast Ion Charge eXchange Spectroscopy is newly applied on a Large Helical Device (LHD) for co/countercirculating fast ions, which are produced by high energy tangential negative-ion based neutral beam injection. With this new observation geometry, both the tangential-neutral beam (NB) and a low-energy radial-NB based on positive ions can be utilized as probe beams of the measurement. We have successfully observed Doppler-shifted H-alpha lights due to the charge exchange process between the probing NB and circulating hydrogen ions of around 100 keV in LHD plasmas.
1 November 2023 in Physics of Plasmas
In this study, we observe avalanche-like electron thermal transport in Heliotron J under plasma conditions that exhibit power degradation to the central electron cyclotron heating (ECH). The newly installed GHz sampling electron cyclotron emission diagnostic allows for the observation of the long-distance radial propagation of electron temperature fluctuations. We find that the electron temperature fluctuations are associated with avalanches, because the Te fluctuations (i) propagate from the core to the edge with a speed comparable to the diamagnetic drift velocity, (ii) exhibit a 1/f power-law scaling in the frequency spectrum and a Hurst exponent close to 1, and (iii) dominate in the ECH deposition location and spread to the edge as the heating power increases. Furthermore, the electron heat avalanches can spread to the scrape off layer region when they are enhanced, i.e., the Te fluctuations correlate with the Dα emission, which also has a frequency spectrum that scales with a 1/f power law.
21 September 2021 in Plasma Physics and Controlled Fusion
We model and characterize the heat load patterns on the vacuum chamber wall in an advanced helical device, Heliotron J, based on the peripheral transport code EMC3-EIRENE, in three typical magnetic configurations with different toroidal mirror ratios (bumpiness). The heat flux distribution on the vacuum chamber wall evaluated with the EMC3-EIRENE code shows several groups of heat flux footprints, some of which are not seen in the connection length distribution obtained with the magnetic field tracing code. This clearly shows the necessity for plasma modeling in addition to magnetic field line tracing in the design of three-dimensional devices. At high electron density, a displacement and an expansion of the heat flux distribution in both the toroidal and poloidal directions are observed. As a result of the heat flux expansion, the peak value of the heat flux decreases at high electron density. Further, an approach that uses the heat distribution function is proposed to evaluate the global power distribution in the entire vacuum chamber. The evaluation results confirm a decrease in the peak heat flux and an increase in the plasma-wetted area at high electron density. The heat flux distribution expansion is larger for the low-bumpiness configuration, in which the peak heat value is by more than lower than that for the high-bumpiness configuration.