10 February 2020 in Applied Physics Letters
Filamentary adaptive oxide devices based on HfOx are a promising technology for neuromorphic computing applications. The resistance of these devices depends on the concentration of oxygen vacancies in the filament region. A local temperature rise from joule heating plays a significant role in the movement of oxygen ions, making thermal management crucial to reliable performance. In this work, the role of the substrate thermal conductivity on the analog performance was investigated at biologically realistic pulse widths. Au/Ti/HfOx/Au adaptive oxide devices were fabricated on substrates with two orders of magnitude difference in thermal conductivity. A lower thermal conductivity substrate dissipates heat more slowly, resulting in a large initial change in resistance from a single operation pulse, which is detrimental to the desired analog behavior. The results were validated by a COMSOL Multiphysics® model that models the flow of heat in both samples.
24 May 2022 in Journal of Applied Physics
Hafnium oxide non-volatile memories have shown promise as an artificial synapse in neuromorphic computing architectures. However, there is still a need to fundamentally understand how to reliably control the analog resistance change induced by oxygen ions that partially rupture or re-form the conductive filament. In this work, the impact of measurement conditions (pulse amplitude and pulse width) and titanium dopants on the analog resistance change of atomic layer deposited hafnium oxide memristor synapses are studied. A lower pulse amplitude improves the linearity of resistance change as a function of the number of pulses but results in a smaller memory window. The addition of titanium dopants does not substantively change the analog resistance modulation of hafnium oxide. Density functional theory calculations show that titanium strongly impacts oxygen ion motion in the HfxTiyOz matrix but does not impact significantly in the HfTi metallic filament. This study demonstrates that the analog characteristic of HfxTiyOz artificial synapses is largely independent of the titanium doped bulk oxide since the resistance change is primarily controlled by the HfTi metallic conducting filament.
1 March 2020 in AIP Advances
Neuromorphic computation using nanoscale adaptive oxide devices or memristors is a very promising alternative to the conventional digital computing framework. Oxides of transition metals, such as hafnium (HfOx), have been proven to be excellent candidate materials for these devices, because they show non-volatile memory and analog switching characteristics. This work presents a comprehensive study of the transport phenomena in HfOx based memristors and involves the development of a fully coupled electrothermal and mass transport model that is validated with electrical and thermal metrology experiments. The fundamental transport mechanisms in HfOx devices were analyzed together with the local and temporal variation of voltage, current, and temperature. The effect of thermal conductivity of substrate materials on the filament temperature, voltage ramp rate, and set/reset characteristics was investigated. These analyses provide insight into the switching mechanisms of these oxides and allow for the prediction of the effect of device architecture on switching behavior.
8 May 2023 in Journal of Applied Physics
As the demand for computing applications capable of processing large datasets increases, there is a growing need for new in-memory computing technologies. Oxide-based resistive random-access memory (RRAM) devices are promising candidates for such applications because of their industry readiness, endurance, and switching ratio. These analog devices, however, suffer from poor linearity and asymmetry in their analog resistance change. Various reports have found that the temperature in RRAM devices increases locally by more than 1000 K during operation. Therefore, temperature control is of paramount importance for controlling their resistance. In this study, scanning thermal microscopy is used to map the temperature of Au/Ti/HfOx/Au devices at a steady power state and to measure temperature dynamics of the top electrode above the filament location during both resistive switching loops and voltage pulsing. These measurements are used to verify the thermal parameters of a multiphysics finite elements model. The model is then used to understand the impact of thermal conductivities and boundary conductances of constituent materials on resistance change during the first reset pulse in RRAM devices. It is found that the resistance change can be reduced significantly when the temperature in the titanium capping layer is reduced. We find that the greatest temperature reduction and, therefore, the lowest resistance change in the device are afforded by capping layers with increased thermal conductivities. This work links thermal properties to the resistance change in RRAM devices, providing critical insights into engineering devices with improved switching dynamics.
6 February 2023 in Applied Physics Letters
Resistive random-access memory (RRAM) devices have been widely studied for neuromorphic, in-memory computing. One of the most studied RRAM structures consists of a titanium capping layer and a HfOx adaptive oxide. Although these devices show promise in improving neuromorphic circuits, high variability, non-linearity, and asymmetric resistance changes limit their usefulness. Many studies have improved linearity by changing materials in or around the device, the circuitry, or the analog bias conditions. However, the impact of prior biasing conditions on the observed analog resistance change is not well understood. Experimental results in this study demonstrate that prior higher reset voltages used after forming cause a greater resistance change during subsequent identical analog pulsing. A multiphysics finite element model suggests that this greater analog resistance change is due to a higher concentration of oxygen ions stored in the titanium capping layer with increasing magnitude of the reset voltage. This work suggests that local ion concentration variations in the titanium capping layer of just tens of atoms cause significant resistance variation during analog operation.