1 September 2023 in Journal of Laser Applications
In the recent years, laser beam welding has become an established joining process, especially for components in the electrical powertrain (copper applications). However, laser beam welding of copper is generally considered to be difficult, particularly due to its high heat conductivity and due to its low absorptivity using laser sources with a wavelength of 1 μm. The resulting welds show numerous weld defects, such as pores and spatters. Using “blue” lasers with a wavelength of 450 nm promises a smoother welding process with less spatters. Therefore, a blue diode laser with increased absorptivity in copper materials was developed by Laserline and used for welding copper. In this contribution, the results of welding copper using blue lasers with respect to the penetration depth and the resulting weld quality are discussed. In addition, investigations by Bosch at the electron-synchrotron DESY with a blue diode laser enabled us to have a look into the material during welding. Consequently, melt pool dynamics and capillary dynamics were analyzed with respect to the formation of weld defects and will be discussed as well. Furthermore, it is demonstrated that it can be beneficial to use a so-called spot-in-spot beam shaping tool to further improve the melt pool dynamics and, therefore, the resulting weld quality.
3 September 2024 in Journal of Laser Applications
To design future laser manufacturing processes for welding of copper materials, more and more high-end analysis methods are required. A fundamental process understanding by analyzing cause-and-effect relations of process dynamics using inline in situ diagnostics allows for an improved description of laser material interaction. Strategies for a reliable and robust welding process are derived from the findings. In this study, a four-step advanced methodical approach is presented and discussed. In the first step, a fundamental process description of the geometry of the vapor capillary and the formation of weld defects is developed. Therefore, welds on electrolytic tough pitch copper (Cu-ETP) and CuSn6 are carried out to analyze the temporal and spatial vapor capillary dynamics depending on laser power, welding speed, and focal diameter. This fundamental process understanding is transferred to the welding of copper pins in the form of I-pins. For this purpose, impurities and imperfections were applied to the pin surface to investigate the effects on the process result. As a third step, strategies by means of laser intensity distributions were adapted to compensate for imperfections in the welding process. Finally, a sensor vision system is adapted for ideal welding results. Investigations are based on in situ synchrotron analysis at Petra III, DESY in Hamburg. For the experiments, a TRUMPF TruDisk laser (100/400 μm fiber diameter), a TRUMPF TruFiber 6000P (50/100 μm fiber diameter), and a single-mode fiber laser (14 μm fiber diameter) were used. The focal diameter was adjusted with the optical system depending on the investigation.