This study aimed to bridge a research gap by exploring the utilization of super-sulphated cement (SSC) in engineered cementitious composites (ECCs) as a sustainable alternative to ordinary Portland cement (OPC)-based mixtures. The SSC was designed with slag, gypsum, and a small amount of OPC. The primary objective was to investigate the effects of incorporating SSC, both with and without fly ash (FA), at various FA/SSC ratios between 0 and 1.5. A comprehensive evaluation was conducted to assess the performance of the ECC-SSC mixtures, including the compressive and flexural strengths, ductility, ultrasonic pulse velocity, rapid chloride permeability, and drying shrinkage. Additionally, advanced microstructural evaluation techniques such as scanning electron microscopy (SEM) with energy dispersive X-ray (EDX) analysis as well as X-ray diffraction (XRD) analysis were employed to analyze the reaction products in selected mixtures. The results showed that the ECC mixture produced with SSC exhibited comparable strength to the ECC-OPC. In general, all the SSC-based ECCs fulfilled the criteria for various engineering applications, especially when the fly ash to SSC ratios were 0 and 0.8. In addition, ECCs with FA/SSC ratios of 1.2 and 1.5 showed ultra-ductile performance higher than the control ECC. Interestingly, all the FA-based ECC-SSC presented lower shrinkage characteristics than the control OPC-based ECC.
1 December 2023 in Soil Dynamics and Earthquake Engineering
Carbon sequestration in modern cementitious materials has emerged as a critical study domain in the attempt to reduce global carbon emissions. This review analyzes the capacity of diverse and innovative concrete types, such as engineered cementitious composites (ECC), ultra-high-performance concrete (UHPC), limestone calcined clay cement (LC 3 )-based concrete, geopolymer concrete, 3D-printed concrete (3DCP), and recycled aggregate concrete, to sequester and store carbon during the curing stage. With a focused effort on understanding carbon sequestration during curing, this study offers a comprehensive overview and examines the challenges associated with optimizing curing processes, highlighting their impact on the mechanical performance and durability of carbon-sequestered matrices. The effects of different curing methods and materials are examined concerning their influence on concrete performance and the optimization for carbon storage. The study emphasizes perpetual issues and outlines critical research gaps that must be addressed to enhance the efficacy of carbon sequestration in modern concrete systems. Recommendations for future research areas are offered to facilitate the advancement of more sustainable and carbon-efficient cementitious materials.
20 November 2023 in Neural Computing and Applications
Considerably high amounts of CO2 release to the atmosphere trigger global warming. Although there are several methods to reduce the level of CO2 release, the extent is still very limited and recently-growing awareness of sustainabil-ity/global warming have been pushing the entire construction industry to seek alternative methods for rigorously lowering/eliminating the level of CO2. The key strategic objective of the study is to develop eco-friendly/innovative, 100% CDW-based construction materials and demountable structural systems. This study aims to achieve higher levels of circularity in civil engineering materials/structures, contributing to the reduction/elimination of CO2 emissions much more rigorously through the following key objectives: (i) Upgrading CDW recycling/reuse efficiency by capturing CO2 from the atmosphere to improve properties of CDW-based constituents via accelerated mineralization/carbonation, (ii) Development of holistically-designed advanced material property improvement technologies to even enhance the greenness of 100% CDW-based materials/structures through efficient CO2 binding/elimination capability, (iii) Validation of the ultimate products (materials/structures) with additional green perspective through a detailed large-scale field demonstration. Despite the abundance of studies in this area, there is currently very little work on demonstration activities on the real-time applicability of geopolymers development using industrial by-products and CDWs. Successful outputs of this study and their real-time demonstration will offer a fully sustainable construction system, including speed of construction/design flexibility/air purification/cost reduction/energy and material saving/avoidance of unwanted pollution-heavy demolition processes and make much larger audience to be influenced by the study’s results.