Shear strength in reinforced concrete (RC) beams, especially in steel fiber reinforced concrete (SFRC) beams is a subject of great interest in structural engineering. In the case of beams without transverse reinforcement, the failure is explained based on a predefined crack pattern and kinematics, and the transfer of shear force accomplished through different mechanisms. Among these mechanisms, the aggregate interlock is present in most of the existing shear strength mechanical models in the literature, with divergences regarding its performance and preponderance. Thus, this paper focuses on evaluating the contribution of aggregate interlock throughout the critical crack formation process up to the ultimate load by performing bending tests on small-scale rectangular RC and SFRC beams without considering the effect of transverse reinforcement. The Digital Image Correlation (DIC) technique is used to track the patterns of shear cracks and their associated kinematics by measuring the relative displacements of opening (w) and sliding (δ). A detailed description of the shear behavior of these beams is provided by quantifying the aggregate interlock using the simplified Walraven model. The results help to understand the level of contribution of the aggregate interlock, and the main differences between structural elements of concrete with and without steel fibers in the scope of the shear strength.
Resumo O entendimento do comportamento à força cortante de vigas de concreto armado, especialmente as vigas de concreto reforçado com fibras de aço (CRFA), ainda é um desafio para a comunidade científica, devido à complexidade do comportamento dos materiais. No entanto, a evolução da técnica de correlação por imagem digital (CID) permitiu a obtenção de dados experimentais fundamentais para a modelagem do comportamento mecânico do CRFA, contribuindo para um melhor entendimento do problema e dos mecanismos resistentes à força cortante. Neste sentido, o presente estudo avalia oito vigas de concreto armado, com e sem fibras de aço, utilizando a técnica CID para quantificar os mecanismos resistentes, com foco nos modelos que podem representar a contribuição das fibras. Os resultados revelaram que os mecanismos preponderantes no comportamento à força cortante foram o engrenamento dos agregados e as fibras de aço. Este estudo representa um avanço no entendimento mais racional do comportamento à força cortante, assim como identifica lacunas que requerem estudos mais aprofundados, como a influência das fibras em todos os mecanismos resistentes e a formulação da contribuição das fibras de aço.