1 June 2021 in International Journal of Geomechanics
The complex nonlinear mechanical behavior of the combined system of rock and coal surrounding mine openings is a major obstacle for excavation, stability, and support design in mining thin coal seams. In this paper, the triaxial compression failure characteristics and mechanical response of sandstone–coal (SC) specimens with different combination angles are determined. In addition, the influence of the anchor bolt on the mechanical properties of SC specimens is also considered. The results show that the mechanical parameters of the SC and sandstone–coal–bolt (SCB) specimens are different from those of other intact rocks and are substantially affected by the angle. The peak axial strain and triaxial compressive strength (TCS) of the specimens decreased with increasing angles. To comprehensively analyze the phase mechanical characteristics of the specimens and the differences between them, we also established the crack initiation stress index (CI) and crack damage stress index (CD) to evaluate the specimen fracture process. The established stress indices CI and CD can accurately describe the roles of the bolt and angle of the SC and SCB specimens. The bolt can enhance the mechanical properties of the SC specimen after reaching the peak load, restrain the development of cracks, and ensure that the specimen maintains integrity. It should be noted that this type of SCB system is in line with the long-term stability of roadway support engineering applications.
1 March 2020 in Journal of Central South University
1 January 2021 in Advances in Civil Engineering
In deep mining engineering, rockburst is an instantaneous release of a large amount of strain energy stored in rock mass, in which occurrence is closely related to initial high stress state and excavation unloading effect. Water can permeate the pores and cracks of rocks and often have a significant effect on the failure mode under stress. The effect of water on rockburst prevention and control has been observed by many researchers in rock engineering. However, the mechanism of rockburst prevention by means of water is seldom researched. In this study, the forming process of strain rockburst is introduced, and the key point to the mechanism of water spraying or water injection to prevent strain rockburst is that the presence of water could cause a transformation of failure mode of rocks during the strain rockburst incubation stage, thereby destroying its formation. In order to explore the specific influence of water on the change of rock failure mode, a crack propagation model with a single inherent main crack and two wing cracks was established, and the most‐easily cracking angle ξ was proposed to analyze the mechanism of the failure mode influenced by different water contents. According to the calculated results of ξ, it was found that when rock is completely dry, the wing crack wing extends towards the loading direction, and ξ is around 90° which mainly induces its splitting failure; conversely, as the water content increases, the wing crack deviates from the loading direction; ξ is around 100° which mainly causes its shear failure. The proposed model in this study can reveal the mechanism of the effects of water on strain rockburst prevention in the view of mesoscale.