20 December 2004 in IEEE Transactions on Speech and Audio Processing
Spherical microphone arrays have been recently studied for sound-field recordings, beamforming, and sound-field analysis which use spherical harmonics in the design. Although the microphone arrays and the associated algorithms were presented, no comprehensive theoretical analysis of performance was provided. This work presents a spherical-harmonics-based design and analysis framework for spherical microphone arrays. In particular, alternative spatial sampling schemes for the positioning of microphones on a sphere are presented, and the errors introduced by finite number of microphones, spatial aliasing, inaccuracies in microphone positioning, and measurement noise are investigated both theoretically and by using simulations. The analysis framework can also provide a useful guide for the design and analysis of more general spherical microphone arrays which do not use spherical harmonics explicitly.
1 October 2004 in The Journal of the Acoustical Society of America
Spherical microphone arrays have been recently studied for sound analysis and sound recordings, which have the advantage of spherical symmetry facilitating three-dimensional analysis. This paper complements the recent microphone array design studies by presenting a theoretical analysis of plane-wave decomposition given the sound pressure on a sphere. The analysis uses the spherical Fourier transform and the spherical convolution, where it is shown that the amplitudes of the incident plane waves can be calculated as a spherical convolution between the pressure on the sphere and another function which depends on frequency and the sphere radius. The spatial resolution of plane-wave decomposition given limited bandwidth in the spherical Fourier domain is formulated, and ways to improve the computation efficiency of plane-wave decomposition are introduced. The paper concludes with a simulation example of plane-wave decomposition.
10 July 2014 in IEEE/ACM Transactions on Audio, Speech, and Language Processing
One of the major challenges encountered when localizing multiple speakers in real world environments is the need to overcome the effect of multipath distortion due to room reverberation. A wide range of methods has been proposed for speaker localization, many based on microphone array processing. Some of these methods are designed for the localization of coherent sources, typical of multipath environments, and some have even reported limited robustness to reverberation. Nevertheless, speaker localization under conditions of high reverberation still remains a challenging task. This paper proposes a novel multiple-speaker localization technique suitable for environments with high reverberation, based on a spherical microphone array and processing in the spherical harmonics (SH) domain. The non-stationarity and sparsity of speech, as well as frequency smoothing in the SH domain, are exploited in the development of a direct-path dominance test. This test can identify time-frequency (TF) bins that contain contributions from only one significant source and no significant contribution from room reflections, such that localization based on these selected TF-bins is performed accurately, avoiding the potential distortion due to other sources and reverberation. Computer simulations and an experiment in a real reverberant room validate the robustness of the proposed method in the presence of high reverberation .
12 February 2007 in IEEE Transactions on Signal Processing
Performance of microphone arrays at the high-frequency range is typically limited by aliasing, which is a result of the spatial sampling process. This paper presents analysis of aliasing for spherical microphone arrays, which have been recently studied for a range of applications. The paper presents theoretical analysis of spatial aliasing for various sphere sampling configurations, showing how high-order spherical harmonic coefficients are aliased into the lower orders. Spatial antialiasing filters on the sphere are then introduced, and the performance of spatially constrained filters is compared to that of the ideal antialiasing filter. A simulation example shows how the effect of aliasing on the beam pattern can be reduced by the use of the antialiasing filters
1 November 2005 in The Journal of the Acoustical Society of America
Directional sound-field information is becoming more important in sound-field analysis and auditorium acoustics, and, as a consequence, a variety of microphone arrays have recently been studied that provide such information. In particular, spherical microphone arrays have been proposed that provide three-dimensional information by decomposing the sound field into spherical harmonics. The theoretical formulation of the plane-wave decomposition and array performance analysis were also presented. In this paper, as a direct continuation of the recent work, a spherical microphone array configured around a rigid sphere is designed, analyzed using simulation, and then used experimentally to decompose the sound field in an anechoic chamber and an auditorium into waves. The array employs a maximum of 98 measurement positions around the sphere, and is used to compute spherical harmonics up to order 6. In the current paper we investigate the factors affecting the performance of plane-wave decomposition, showing that the direct sound and several reflections in an auditorium can be identified experimentally. This suggests that the microphone arrays studied here can be employed in various acoustic applications to identify the characteristics of reverberant sound fields.
19 September 2005 in IEEE Signal Processing Letters
Phase-mode spherical microphone array processing, also known as spherical harmonic array processing, has been recently studied for various applications. The spherical array configuration provides desired three-dimensional symmetry, while the phase modes provide frequency-independent spatial processing. This letter employs the spherical harmonic framework to compare the well-known delay-and-sum to the phase-mode processing for spherical arrays. The two approaches show similar performance at frequencies where the upper spherical harmonic order equals the product of the wave number and sphere radius. However, at lower frequencies, phase-mode processing maintains the same directivity, limited by signal-to-noise ratio, while for delay-and-sum, spatial resolution deteriorates.