Metal halide perovskite solar cells (PSC) exhibit outstanding power conversion efficiencies when fabricated as mm-sized devices, but creation of high-performing large-area PSCs that are stable under operating conditions on a sufficiently long timescale still presents a significant challenge. We demonstrate herein that modification of the interface between the perovskite and a spiro-OMeTAD hole-transporting material with commercially available para-substituted benzenethiol molecules facilitates fabrication of cm-sized PSCs with both improved efficiency and stability. Comprehensive analysis using specialised and conventional physical characterisation techniques has been undertaken to demonstrate that band alignment at the perovskite surface can be tuned to improve the solar cell efficiency via adsorption of benzenethiols with a significant dipole moment. Moreover, modification of the perovskite with cyano-substituted benzenethiol enhances charge extraction and reduces charge recombination in the devices. These effects enable improvements in the power conversion efficiency of PSCs from 19.0 to 20.2% and from 18.5 to 19.6% under 1 sun AM 1.5G irradiation with 0.16 and 1.00 cm2 apertures, respectively. Most importantly, benzenethiol-modified perovskite solar cells retain more than 80% of the initial performance after 185 h of continuous operation at 50% relative humidity and 50 °C device temperature under 1 sun irradiation, while devices with no interfacial modification undergo continuous deterioration down to 35% of the initial efficiency. These significant improvements are provided by a very simple and highly reproducibile modification procedure that can be readily adopted in other types of PSCs.
Caesium silver bismuth halide double perovskites, in the first instance Cs2AgBiBr6, were recently introduced to the field of emerging photovoltaics as environmentally friendly, non-toxic and thermodynamically stable photoabsorber materials. However, the wide indirect bandgaps of these materials indicate the need for bandgap engineering and enhancing the light absorption to improve the photovoltaic performance. The present work demonstrates that this can be achieved via modification of the double perovskite with sulphide to obtain caesium silver bismuth sulphobromide materials, Cs2AgBiBr6−2xSx, which have been synthesised as pin-hole-free uniform films and systematically investigated herein. Notable enhancements in the intrinsic light absorption for 0 ≤ x ≤ 0.2 are demonstrated, as are the improvements by up to 50% in the photocurrent density of the corresponding thin-film solar cells. The devices based on the films with the nominal composition Cs2AgBiBr5.8S0.1 delivered a short-circuit current density of 3.0 ± 0.3 mA cm−2 and a power conversion efficiency of 1.9 ± 0.1% (cf. 2.1 ± 0.2 mA cm−2 and 1.3 ± 0.1%, respectively, for the control cells based on the sulphide-free Cs2AgBiBr6). Equally important, caesium silver bismuth sulphobromides demonstrate excellent stability against all common environmental stimuli, viz. heat, light, and humidity.
Highly fluorescent perovskite materials have attracted considerable interest for fundamental research and potential applications. In this work, we demonstrate the recoverable PL quenching of methylammonium lead halides (MAPbX3, where X is Cl, Br or I) upon exposure to gaseous ammonia that enables the use of hybrid perovskites in gas-sensing applications. XRD analysis confirmed that the MA cations in the perovskite material were replaced by NH3 to form NH4PbX3·MA, thereby resulting in distinct changes in the crystalline structure and, consequently, PL quenching. However, as a weak coordination complex, NH4PbX3·MA can be easily thermally decomposed to recover the starting product MAPbX3 with the release of ammonia. An in-depth understanding of the reversible chemical and structural changes of the perovskites by exposing them to polar molecules such as ammonia can advance the development of hybrid perovskite sensors and provides insights into the mechanisms of how perovskites coordinate with polar molecules.