7 October 2020 in Polymer Composites
21 December 2023 in Polymer Composites
5 May 2021 in Journal of Materials Engineering and Performance
23 May 2023 in IEEE Access
To improve the fatigue life of wheels, the level of lightweight design, and the efficiency and accuracy of optimization analysis, a wheel finite element analysis model combining shell-body elements is established in this paper. A design and optimization method for the assembled wheel with a magnesium alloy rim and an aluminum alloy disc structure is proposed. The conceptual design model of the wheel is established, and the topology of the discs is optimized by combining the bending and radial fatigue test conditions. An implicit parametric model of the rim was built using SFE-Concept software and connected to the disc structure by bolt elements to form an assembled wheel. The performance parameters such as stress, displacement, life and life safety factor of assembled wheels under bending and radial fatigue conditions, and modal frequency are analyzed to study the influence law of wheel structural parameters on fatigue performance. A parametric model for fatigue analysis of assembled wheels is created based on advanced mesh deformation technique and implicit parameterization technique, Design of experiment (DOE) sampling is performed, and 21 design variables are screened in combination with the contribution analysis method. A hybrid method of entropy weighted grey relation analysis (EGRA) combined with modified non-dominated sorting genetic algorithm-II (MNSGA-II) is proposed for multi-objective optimization of the assembled wheel in combination with an approximate model approach to obtain the Pareto frontier solution set and its grey relation order to filter the preferred compromise solution. The performance indexes of assembled wheels before and after optimization were compared by simulation analysis and verified by bending and radial fatigue tests. The results show: With the preferred compromise solution screened out, all indicators of the fatigue performance of the assembled wheel have been reasonably improved. The wheel’s weight is reduced by 10.17%, and the weight reduction effect is remarkable. In this paper, we propose a hybrid method with entropy-weighted grey relation analysis (EGRA) combined with modified non-dominated sorting genetic algorithm-II (MNSGA-II), which can sufficiently synthesize the performance indexes of the wheel. Under the condition of guaranteed computational accuracy, the combined wheel shell-body cell model proposed in this paper saves at least 46.44% computational time compared with the body element model. This paper presents the implicit parametric shell-body element combination model scheme and entropy-weighted grey relation analysis ranking multi-objective optimization solution set method, which provides a reference for lightweight wheel design.
29 November 2025 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Cell-to-Body (CTB) and Cell-to-Chassis (CTC) technologies enhance body performance through integration. This article proposes a novel hybrid cellular automata (HCA)-based multi-case topology optimization method for CTB-specific battery pack system (BPS) design, uniquely integrating linear (bending/torsional stiffness) and nonlinear (crash) loads. Simulation-derived weights guide BPS optimization under multi-constraints. Results demonstrate 41.3% reduction in equivalent plastic strain (EPS) under frontal crash, 38.9% under mid-column crash and 6.7%/5.7% gains in bending/torsional stiffness. Optimized structures exhibit efficient force transfer, evidenced by uniform stress distributions and reduced von Mises stress. This work advances integrated BPS design for CTB/CTC architectures, improving vehicle safety and NVH performance.
23 September 2025 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
The aim of this article is to discuss the application of multi-task regression (MTR) in multi-objective optimization of automobile crashworthiness and lightweight. The applicability of MTR in such tasks is assessed by comparing the fitting accuracy of single-task regression (STR) and MTR. Two typical cases were selected for the study: an automotive front-end structure (frontal rigid wall crash) and a battery pack system (side rigid column crush). A surrogate is constructed using a multi-layer perceptron (MLP), and comprehensive correlation coefficient is used for feature screening and Bayesian optimization is used for hyper-parameter optimization. This study finds that MTR has higher prediction accuracy for objectives with poor STR performance when the STR surrogate’s performance is disparate between objectives. In the three-objective case, combining with two better-performing objectives brings more significant improvement than combining with a single objective. Ultimately, multi-task regression-based multi-objective optimization is solved using the U-NSGA-III algorithm and a compromise solution is selected using the Entropy-Gray method. It is shown that MTR has the potential to improve the efficiency and effectiveness of optimization in crashworthiness and lightweight multi-objective optimization tasks.