15 April 2021 in Nature Photonics
24 May 2022 in IEEE Transactions on Electron Devices
Recent advancements in nanofabrication have enabled the creation of vacuum electronic devices with nanoscale free-space gaps. These nanoelectronic devices promise the benefits of cold-field emission and transport through free space, such as high nonlinearity and relative insensitivity to temperature and ionizing radiation, all while drastically reducing the footprint, increasing the operating bandwidth, and reducing the power consumption of each device. Furthermore, planarized vacuum nanoelectronics could easily be integrated at scale similar to typical microscale and nanoscale semiconductor electronics. However, the interplay between different electron emission mechanisms from these devices is not well understood, and inconsistencies with pure Fowler–Nordheim (FN) emission have been noted by others. In this work, we systematically study the current–voltage characteristics of planar vacuum nanodevices having few-nanometer radii of curvature and free-space gaps between the emitter and the collector. By investigating the current–voltage characteristics of nearly identical devices fabricated from two different materials and under various environmental conditions, such as temperature and atmospheric pressure, we are able to clearly isolate three distinct emission regimes within a single device: Schottky, FN, and saturation. Our work will enable robust and accurate modeling of vacuum nanoelectronics, which will be critical for future applications requiring high-speed and low-power electronics capable of operation in extreme conditions.
16 August 2024 in Science Advances
Electronic frequency mixers are fundamental building blocks of electronic systems. Harmonic frequency mixing in particular enables broadband electromagnetic signal analysis across octaves of spectrum using a single local oscillator. However, conventional harmonic frequency mixers do not operate beyond hundreds of gigahertz to a few terahertz. If extended to the petahertz scale in a compact and scalable form, harmonic mixers would enable field-resolved optical signal analysis spanning octaves of spectra in a monolithic device without the need for frequency conversion using nonlinear crystals. Here, we demonstrate lightwave-electronic harmonic frequency mixing beyond 0.350 PHz using plasmonic nanoantennas. We demonstrate that the mixing process enables complete, field-resolved detection of spectral content far outside that of the local oscillator, greatly extending the range of detectable frequencies compared to conventional heterodyning techniques. Our work has important implications for applications where optical signals of interest exhibit coherent femtosecond-scale dynamics spanning multiple harmonics.
29 July 2021 in Journal of Vacuum Science & Technology B
Lateral field emission devices have been characterized and degradation tested for >1000 h to study stability and reliability. Two types of planar device structures, diode and bowtie, were studied. These nanoscale devices have 10–20 nm tip to tip or tip to collector dimensions with the tips fabricated from Au/Ti. Typical currents of 2–6 nA at 6 V were measured. The devices were placed on lifetime tests in a vacuum of 1000 h. Seven total devices were tested with one failing at 300 h. and three of the devices showed <5% degradation in current until 1400 h when testing was stopped, and three other devices showed a sudden drop of ≈20% ranging from 700 to 900 h. Optical microscope images of one of the devices that failed catastrophically at 350 h show physical arc damage where the bond pad narrows to the emitter trace. Scanning electron microscope images of a bowtie part that completed 1400 h of operation showed no obvious erosion or damage to the tips.
1 March 2021 in Journal of the Optical Society of America B
In this work, we investigate multiphoton and optical field tunneling emission from metallic surfaces with nanoscale vacuum gaps. Using time-dependent Schrödinger equation (TDSE) simulations, we find that the properties of the emitted photocurrent in such systems can be greatly altered by the application of only a few-volt direct current (DC) bias. We find that when coupled with expected plasmonic enhancements within the nanometer-scale metallic gaps, the application of this DC bias significantly reduces the threshold for the transition to optical-field-driven tunneling from the metal surface, and could sufficiently enhance the emitted photocurrents, to make it feasible to electronically tag fJ ultrafast pulses at room temperature. Given the petahertz-scale instantaneous response of the photocurrents, and the low effective capacitance of thin-film nanoantenna devices that enables response time, detectors that exploit this bias-enhanced surface emission from nanoscale vacuum gaps could prove to be useful for communication, petahertz electronics, and ultrafast optical-field-resolved metrology.
13 November 2025 in Physical Review Letters
High-fidelity, meter-scale microwave interconnects between superconducting quantum processor modules are a key technology for extending the system size beyond constraints imposed by device manufacturing equipment, yield, and signal delivery. Although tomographic experiments have been used in previous demonstrations for benchmarking remote state transfer between modules, they do not reliably separate state preparation and measurement (SPAM) error from the error per state transfer. Recent developments based on randomized benchmarking provide a compatible theory for separating these two errors. In this Letter, we present a module-to-module interconnect based on tunable-coupling qubits and benchmark, in a SPAM-error-tolerant manner enabled by a frame-tracking technique, a remote state transfer fidelity of 98.8% across a 60 cm-long coplanar waveguide (CPW). The state transfer is implemented via a superadiabatic transitionless driving method, which suppresses intermediate excitation in the internal modes of the CPW. We further propose and construct a remote cnot gate between modules, composed of local controlled-Z (CZ) gates in each module and remote state transfers, and report a gate fidelity of 93.3% using the randomized benchmarking method. The remote cnot construction and benchmarking we present provide a way to fully characterize the module-to-module link operation and standardize reporting fidelity, analogous to randomized benchmarking protocols for other quantum gates.