26 October 2015 in Discover Nano
The intrinsic scaling-down ability, simple metal-insulator-metal (MIM) sandwich structure, excellent performances, and complementary metal-oxide-semiconductor (CMOS) technology-compatible fabrication processes make resistive random access memory (RRAM) one of the most promising candidates for the next-generation memory. The RRAM device also exhibits rich electrical, thermal, magnetic, and optical effects, in close correlation with the abundant resistive switching (RS) materials, metal-oxide interface, and multiple RS mechanisms including the formation/rupture of nanoscale to atomic-sized conductive filament (CF) incorporated in RS layer. Conductance quantization effect has been observed in the atomic-sized CF in RRAM, which provides a good opportunity to deeply investigate the RS mechanism in mesoscopic dimension. In this review paper, the operating principles of RRAM are introduced first, followed by the summarization of the basic conductance quantization phenomenon in RRAM and the related RS mechanisms, device structures, and material system. Then, we discuss the theory and modeling of quantum transport in RRAM. Finally, we present the opportunities and challenges in quantized RRAM devices and our views on the future prospects.
1 January 2018 in AIP Advances
β-Ga2O3 is an ultra-wide bandgap semiconductor with applications in power electronic devices. Revealing the transport characteristics of β-Ga2O3 devices at various temperatures is important for improving device performance and reliability. In this study, we fabricated a Pt/β-Ga2O3 Schottky barrier diode with good performance characteristics, such as a low ON-resistance, high forward current, and a large rectification ratio. Its temperature-dependent current–voltage and capacitance–voltage characteristics were measured at various temperatures. The characteristic diode parameters were derived using thermionic emission theory. The ideality factor n was found to decrease from 2.57 to 1.16 while the zero-bias barrier height Φb0 increased from 0.47 V to 1.00 V when the temperature was increased from 125 K to 350 K. This was explained by the Gaussian distribution of barrier height inhomogeneity. The mean barrier height b0 = 1.27 V and zero-bias standard deviation σ0 = 0.13 V were obtained. A modified Richardson plot gave a Richardson constant A* of 36.02 A·cm−2·K−2, which is close to the theoretical value of 41.11 A·cm−2·K−2. The differences between the barrier heights determined using the capacitance–voltage and current–voltage curves were also in line with the Gaussian distribution of barrier height inhomogeneity.
1 June 2018 in AIP Advances
In this letter, MOS capacitors with bilayer dielectrics consisted of large bandgap Al2O3 and high-k HfO2 in different stacking order on n-type doped (100) β-Ga2O3 are investigated through C − V and J − V measurement. The C − V measurement results reveal that incoming HfO2 makes both bilayer structures attain an increasing dielectric constant, which means a better gate control ability in transistors comparing with single Al2O3. Additionally, the interface state density extracted by high-low frequency capacitance method suggests that Al2O3/(100)β-Ga2O3 with no treatment shows a comparative Dit value (8.0 × 1012 cm-2eV-1 to 2.2 × 1011 cm-2eV-1) with HfO2/(100)β-Ga2O3 (8.4 × 1012 cm-2eV-1 to 1.0 × 1011 cm-2eV-1) in energy range of 0.2 to 0.9 eV. Furthermore, HfO2/Al2O3/Ga2O3 showing a bigger forward breakdown voltage of 11.0 V than 7.8 V of Al2O3/HfO2/Ga2O3 demonstrates that inserted larger bandgap Al2O3 insulator between Ga2O3 semiconductor and high-k HfO2 dielectric can prevent gate leakage current more effectively. Accordingly, the HfO2/Al2O3/Ga2O3 can enhance gate control ability with an acceptable gate breakdown voltage and become an alternative choice in the design of the gate structure for Ga2O3 MOSFETs.
21 November 2017 in Journal of Physics D: Applied Physics
Memristive stateful logic has emerged as a promising next-generation in-memory computing paradigm to address escalating computing-performance pressures in traditional von Neumann architecture. Here, we present a nonvolatile reprogrammable logic method that can process data between different rows and columns in a memristive crossbar array based on material implication (IMP) logic. Arbitrary Boolean logic can be executed with a reprogrammable cell containing four memristors in a crossbar array. In the fabricated Ti/HfO 2 /W memristive array, some fundamental functions, such as universal NAND logic and data transfer, were experimentally implemented. Moreover, using eight memristors in a 2 × 4 array, a one-bit full adder was theoretically designed and verified by simulation to exhibit the feasibility of our method to accomplish complex computing tasks. In addition, some critical logic-related performances were further discussed, such as the flexibility of data processing, cascading problem and bit error rate. Such a method could be a step forward in developing IMP-based memristive nonvolatile logic for large-scale in-memory computing architecture.