Organic carbonyl electrode materials of lithium batteries have shown multifunctional molecule design and high capacity, but have the problems of poor cycling and low rate performance due to their high solubility in traditional carbonate‐based electrolytes and low conductivity. High‐performance organic lithium batteries with modified ether‐based electrolyte (2 m LiN(CF3SO2)2 in 1,3‐dioxolane/dimethoxyethane solvent with 1% LiNO3 additive (2m‐DD‐1%L)) and 9,10‐anthraquinone (AQ)/CMK‐3 (AQC) nanocomposite cathode are reported here. The electrochemical results manifest that 2m‐DD‐1%L electrolyte promotes the cycling performance due to the restraint of AQ dissolution in ether‐based electrolyte with high Li salt concentration and formation of a protection film on the surface of the anode. Additionally, the AQC nanocomposite improves the rate performance because of the nanoconfinement effect of CMK‐3 and the decrease of charge transfer impedance. In 2m‐DD‐1%L electrolyte, AQC nanocomposite delivers an initial discharge capacity of 205 mA h g−1 and a capacity of 174 mA h g−1 after 100 cycles at 0.2 C. Even at a high rate of 2 C, its capacity is 146 mA h g−1. This strategy is also used for other organic carbonyl compounds with quinone substructures and they maintain high stable capacities. This sheds light on the development of advanced organic lithium batteries with carbonyl electrode materials and ether‐based electrolytes.
Cobalt phosphide (CoP) nanoparticles which were uniformly embedded in N-doped C nanosheets (CNSs) were fabricated via the simple one-step calcination of a Co-based metal–organic framework (MOF) and red P and exhibited a high capacity, fast kinetics, and a long cycle life. This CoP/CNS composite contained small CoP particles (approximately 11.3 nm) and P–C bonds. When its electrochemical properties were evaluated by testing CoP/Na coin cells, the composite delivered a Na-storage capacity of 598 mAh·g−1 at 0.1 A·g−1 according to the total mass of the composite, which means that the capacity of pure CoP reached 831 mAh·g−1. The composite also exhibited a high rate capability and long-term cyclability (174 mAh·g−1 at 20 A·g−1 and 98.5% capacity retention after 900 cycles at 1 A·g−1), which are commonly attributed to robust P–C bonding and highly conductive CNSs. When the reaction mechanism of the CoP/CNS composite was investigated, a conversion reaction expressed as CoP + 3Na+ + 3e− ↔ Co + Na3P was observed. The outstanding Na-storage properties of the CoP/CNS composite may suggest a new strategy for developing high-performance anode materials for Na-ion batteries.