The solid state diffusion-controlled growth of the phases is studied for the Au–Sn system in the range of room temperature to 200 °C using bulk and electroplated diffusion couples. The number of product phases in the interdiffusion zone decreases with the decrease in annealing temperature. These phases grow with significantly high rates even at the room temperature. The growth rate of the AuSn4 phase is observed to be higher in the case of electroplated diffusion couple because of the relatively small grains and hence high contribution of the grain boundary diffusion when compared to the bulk diffusion couple. The diffraction pattern analysis indicates the same equilibrium crystal structure of the phases in these two types of diffusion couples. The analysis in the AuSn4 phase relating the estimated tracer diffusion coefficients with grain size, crystal structure, the homologous temperature of experiments and the concept of the sublattice diffusion mechanism in the intermetallic compounds indicate that Au diffuses mainly via the grain boundaries, whereas Sn diffuses via both the grain boundaries and the lattice.
The paper reports effect of small ternary addition of In on the microstructure, mechanical property and oxidation behaviour of a near eutectic suction cast Nb–19·1 at-Si–1·5 at-In alloy. The observed microstructure consists of a combination of two kinds of lamellar structure. They are metal–intermetallic combinations of Nbss– β-Nb5Si3 and Nbss– α-Nb5Si3 respectively having 40–60 nm lamellar spacings. The alloy gives compressive strength of 3 GPa and engineering strain of ∼3 at room temperature. The composite structure also exhibits a large improvement in oxidation resistance at high temperature (1000°C).