1 December 2016 in IEEE Transactions on Dielectrics and Electrical Insulation
Electrical treeing experiments have been conducted at different temperatures and levels of absorbed moisture in Araldite CY1311 epoxy resin samples above their glass transition temperature, i.e. when the resin was in a flexible state. The fractal dimension of the electrical trees obtained and the rate of tree growth were found to depend on the environmental factors: temperature and humidity. It has also been found that at certain levels of temperature and moisture absorbed in the samples, a transition occurs from electrical treeing degradation to breakdown by thermal runaway. Complementary investigations of the dielectric properties of the same epoxy resin system have revealed that a bulk quasi-dc (QDC) charge transport mechanism takes place above the glass transition temperature, and we show that the characteristic features of the dielectric response are related to the shape of the electrical treeing degradation and the transition to thermal breakdown. This is explained qualitatively through the effect of the bulk QDC charge transport process in modifying the local space charge electric field distribution.
1 December 2016 in IEEE Transactions on Dielectrics and Electrical Insulation
The dielectric response of three kinds of filled high temperature vulcanized (HTV) silicone rubber - SiO 2 based nanocomposite with different alumina tri-hydrate (ATH) micro-filler contents are investigated over a wide range of frequency and temperature. The results are analyzed in terms of the many-body Dissado-Hill dielectric response theory. In all three kinds of silicone rubber, a quasi-DC (QDC) process, a Dissado-Hill loss peak process and a diffusion process are observed. Specifically, the ATH filler contributes a QDC electrical transport/hopping process, which at higher temperatures causes the formation of a diffusion layer at the electrodes. The nano-SiO 2 particles combined with rubber matrix give a Dissado-Hill loss peak dielectric relaxation. These two dispersion processes are shown to be associated with the interior interfaces of filled HTV silicone rubber. The effects of ATH filler content and temperature on the dielectric response are also analyzed in depth.
1 December 2017 in IEEE Transactions on Dielectrics and Electrical Insulation
This work assesses the initial and crucial part of electrical treeing degradation, the inception stage, focusing on its dependence on applied voltage waveform and frequency. Tests have been performed on needle-plane configuration samples in solids and gels. A physical model has been formulated through an adaptation of an established theory for solids in which electrical tree inception is related to damage-producing injection currents. The voltage rise time appeared to be the most important parameter influencing the tree inception in the gel, while in the solid material the frequency is more relevant. The analysis leads to the conclusion that tree inception in gels is due to a single high-energy event, in contrast to what is commonly known for solids where damage accumulation takes place. A tree inception model is proposed for the gel, in which initiation is driven by a pressure wave generated by the electric field and the space charge injected into the sample. The model fits the experimental data and may be used to predict the tree initiation for different waveforms and voltage values.
16 June 2014 in IEEE Transactions on Dielectrics and Electrical Insulation
The dielectric properties of two amine cured bisphenol-A epoxy resin systems, Araldite CY1301 and Araldite CY1311 have been characterized using dielectric spectroscopy over the frequency range 1 mHz to 100 kHz. These two epoxy resin systems were chosen to allow the dielectric response to be studied from above and below the glass transition, as Araldite CY1311 is a modified version (with added plasticizer) of Araldite CY1301. The dielectric response was found to comprise both bulk and interfacial features. Above the glass transition temperature, two processes were identified, a low frequency process usually ascribed to interfacial polarization is shown to be a bulk process termed Quasi-DC (QDC) conduction and a dielectric dispersion usually taken to be a bulk process has been shown to be an interfacial effect.
1 July 2018 in Composites Science and Technology