2 April 2022 in Materials Letters
28 July 2020 in Automotive Innovation
4 January 2022 in Metallurgical and Materials Transactions A
22 September 2022 in Journal of Materials Engineering and Performance
1 February 2015 in Science and Technology of Welding and Joining
A new laser welding process with the local cooling was presented and applied to two automotive dual phase steels, DP780 and DP980. The microstructure, microhardness, tensile properties of welded joints and limiting dome height (LDH) of welded blanks were investigated. It is observed that the local cooling during laser welding process can greatly reduce the martensite tempering and thus reduce the heat affected zone softening. The laser welded joints with the local cooling all failed at the base metal, and exhibit the comparable strength and ductility with the base metal. For the welded blanks with the local cooling, LDH is increased significantly, and failure initiates from the weld and propagates perpendicular to the weld.
27 September 2022 in Architectural Intelligence
The lunar base is not only an experimental station for extraterrestrial space exploration but also a dwelling for humans performing this exploration. Building a lunar base presents numerous obstacles and requires environmental perception, feedback design, and construction methods. An integrated fabrication process that incorporates design, 3D printing workflow, and construction details to build a bionic, reconfigurable and high-performance lunar base prototype is presented in this paper. The research comprises the study of the lunar regolith 3D printing mechanism, the real-time control of powder laying and compaction procedure, and the development of a 3D printing tool end system. In this paper, many scientific questions regarding in situ fabrication on the lunar surface are raised and addressed with the proposal of a progressive optimization design method, the molding principle, and gradation strategy of lunar soil-polyaryletherketone (PAEK) hybrid powder, and the principle of dual-light field 3D laser printing. The feasibility of the technical strategy proposed in this paper is verified by the presented empirical samples.