19 December 2019 in Optics Express
Simultaneous dual-wavelength laser oscillation of Tm:YLF at 1.9 and 2.3 μm were successfully realized. The three-mirror cavity was exploited to study dual-wavelength laser performance, which is formed by a shared input mirror and two independent output couplers for the two laser wavelengths. Under an absorbed pump power of 15.2 W, the maximum CW output powers of 5.49 W around 1908 nm and 1.12 W around 05 nm were simultaneously obtained, corresponding to a total optical-to-optical conversion efficiency of 43.5%. A Cr2+:ZnSe was further used to passively Q-switch the dual-wavelength laser, generating pulses with pulse widths of 554 ns at 1.9 μm and 4 μs at 2.3 μm. To the best of our knowledge, this is the first report on the dual-wavelength laser operation of Tm3+-single-doped solid-state laser at 1.9 and 2.3 μm. The higher optical conversion efficiency, smaller wavelength competition effect and simultaneous dual-wavelength output make this Tm-doped solid-state laser have potential application in real-time medical detection and treatment.
2 June 2016 in Optics Letters
Gold nanorods (GNRs) with an average aspect ratio of 15 were experimentally exploited as the 2 μm saturable absorber in a laser diode pumped Tm:YAG laser for the first time, to the best of our knowledge. -switched pulses with a maximum average output power of 380 mW, a minimum pulse width of 796 ns, and a pulse repetition rate of 77 kHz were achieved under the LD pump power of 6.2 W. Our results indicate that GNRs with a large aspect ratio are promising saturable absorbers in the 2 μm wavelength region.
4 January 2017 in Optical Materials Express
A diode-pumped continuous-wave and a Q-switched Tm:Y2O3 ceramic laser operating around 2050 nm were demonstrated. The maximum output power of 7.25 W, with a slope efficiency of 40% for continuous-wave operation and shortest pulse width of 115 ns at a repetition of 1 kHz for Q-switched operation, was achieved.
24 April 2019 in OSA Continuum
A 785 nm diode-pumped nanosecond passively Q-switched (PQS) 2.3 µm Tm:YLF laser using a ReSe2-based saturable output coupler (SOC) was reported for the first time. The SOC combined the function of a passive Q-switch and output coupler, greatly reducing the additional insertion loss compared with a conventional separate structure. The modulation depth, saturation intensity, and nonsaturable loss for this ReSe2-based SOC were determined to be 1.3%, 1.7 GW/cm2, and 0.2%, respectively. A maximum average output power of 486 mw, a shortest pulse width of 716 ns, and a repetition rate of 5.0 kHz were obtained under the absorbed pump power of 7.21 W. The nanosecond pulses make the diode-pumped compact 2.3 µm thulium solid-state lasers more attractive for practical applications.
8 August 2017 in Optical Materials Express
A continuous-wave (CW) and passively Q-switched Tm:Y2O3 ceramic laser emitting at 2.1 μm were reported for the first time. A volume Bragg grating (VBG) acted as the input mirror which enables wavelength selection of the Tm:Y2O3 laser. The gold-nanorods-based saturable output coupler combined the function of passive Q-switching and output coupling. In the CW mode, the VBG-locked Tm:Y2O3 ceramic laser generated 1.1 W at 2101.5 nm with a linewidth (FWHM) of 0.4 nm. In the passively Q-switched operation, pulses with a maximum average output power of 455 mW, a minimum pulse width of 609 ns, and a pulse repetition rate of 79 kHz were achieved. Our work provides a more compact and efficient design for obtaining a nanosecond 2.1 μm laser.
1 January 2021 in Chinese Optics Letters
The population trapping effect of the level is an important factor limiting the power scaling of the 2.3 μm thulium (Tm) laser on the transition. In this Letter, we demonstrate a novel scheme of ground state absorption (GSA) () and excited state absorption (ESA) () dual-wavelength pumped 2.3 μm Tm lasers. Introducing an ESA pumping process can accurately excite the ions accumulated in the level to the level, constructing a double populating mechanism for the upper laser level . A proof-of-principle experimental demonstration of the GSA (785 nm) and ESA (1470 nm) dual-wavelength pumped 2.3 μm (Tm:YLF) laser was realized. A maximum continuous-wave output power of 1.84 W at 2308 nm was achieved under 785 and 1470 nm dual-wavelength pumping, increased by 60% compared with the case of 785 nm single-wavelength pumping under the same resonator condition. Our work provides an efficient way to achieve higher output power from 2.3 μm Tm-doped lasers on the transition.