In this work, virtual fields method (VFM) is applied to extract the constitutive parameter of silicone elastomers under equi-biaxial and general biaxial tests; the influence of missing deformation data near specimen edges and noise introduced by digital image correlation (DIC) on parameter identification using VFM is investigated. The results indicate that the negative impact of the missing data and noise can be mitigated by scaling the load applied to the specimen boundary properly and extracting parameters based on the deformation fields of all loading steps through the least square method.
2 June 2025 in Journal of Rehabilitation and Assistive Technologies Engineering
Introduction: To reduce muscle strain and enhance user comfort, a Pneumatically Actuated Soft Wearable Robotic Elbow Exoskeleton was developed. The design integrates human joint mechanics with a single-piece pneumatic structure for optimal assistance and reduced complexity. Methods: Nineteen participants performed tasks under “Support On” and “Support Off” conditions to evaluate their effectiveness and feasibility. Muscle activity was measured using Surface Electromyography, while torque output and inflation times were assessed to gauge mechanical performance. Results: The Soft Wearable Robotic Elbow Exoskeleton reduced muscle activity in the biceps by 22.36% and in the triceps by 18.19% at 18 PSI (Pounds per Square Inch). Torque tests revealed a maximum output of 4.39 Nm at 21 PSI. Inflation time tests showed that the exoskeleton could reach total inflation in as little as 0.22 seconds in high mode at 25 PSI, demonstrating the ability to achieve rapid actuation speed and efficiency. Conclusions: These results indicate that the Soft Wearable Robotic Elbow Exoskeleton significantly reduces muscle activation, which may help mitigate the risk of work-related musculoskeletal disorders. By providing effective assistance during repetitive tasks, the exoskeleton enhances both mechanical performance and user comfort.