Mohammed A. Gabr

Mohammed A. Gabr

Auto-generated profile, based on publicly available information

Mohammed A. Gabr

North Carolina State Univ

Research Focus & Metrics

Academic Career Length

37Years (1990-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2002 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
JHJ. Han
J. Han
MGM. A. Gabr
M. A. Gabr
Geotechnical engineers face several challenges when designing structures over soft soils. These include potential bearing failure, intolerable settlement, large lateral pressures and movement, and global or local instability. Geosynthetic-reinforced and pile-supported earth platforms provide an economic and effective solution for embankments, retaining walls, and storage tanks, etc. constructed on soft soils; especially when rapid construction and/or strict deformation of the structure are required. The inclusion of geosynthetic(s) in the fill enhances the efficiency of load transfer, minimizes yielding of the soil above the pile head, and potentially reduces total and differential settlements. A numerical study has been conducted to investigate pile-soil-geosynthetic(s) interactions by considering three major influence factors: the height of the fill, the tensile stiffness of geosynthetic, and the elastic modulus of pile material. While current methods have not fully addressed important effects of the geosynthetic stiffness and pile modulus on the soil arching ratio, numerical results suggested that the stress concentration ratio and the maximum tension in geosynthetic increase with the height of the embankment fill, the tensile stiffness of geosynthetic, and the elastic modulus of the pile material. The distribution of tension force in the geosynthetic reinforcement indicated that the maximum tension occurs near the edge of the pile.

15 September 2000 in Journal of Hazardous Materials
Verified
Journal Article
Closed access
MGM Gabr
M Gabr

13 July 2002 in Environmental Science & Technology
Verified
Journal Article
Closed access
MBMorton A. Barlaz
Morton A. Barlaz
ARAlix P. Rooker
Alix P. Rooker
PKPeter Kjeldsen
Peter Kjeldsen
MGMohammed A. Gabr
Mohammed A. Gabr
RBRobert C. Borden
Robert C. Borden

1 December 2003 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
MHM. S. Hossain
M. S. Hossain
MGM. A. Gabr
M. A. Gabr
MBM. A. Barlaz
M. A. Barlaz
Recently, there has been substantial interest in the enhancement of refuse decomposition in landfills, which results in increased settlement. In this paper, changes in waste compressibility as a function of the state of decomposition are reported. Samples representative of residential refuse were decomposed under conditions designed to simulate decomposition in both control and bioreactor landfills. Twenty four one-dimensional oedometer tests (63.5 mm cell) were performed on refuse prepared in laboratory-scale reactors for measurement of primary (Cc) and secondary (Cαi, representing creep, and Cβi, representing biological) compression indices. The state of decomposition was quantified by the methane yield and the cellulose (C) plus hemicellulose (H) to lignin (L) ratio. The magnitude of compressibility was shown to increase as refuse decomposed and compressibility parameters were correlated with the state of decomposition. Initial settlement increased with decreasing (C+H)/L ratio while the creep index was fairly independent of the state of decomposition. The coefficients of primary compression (Cc) for bioreactor samples showed an increasing trend with decreasing (C+H)/L ratios. Cc increased from 0.16 to 0.36 as (C+H)/L decreased from 1.29 to 0.25, and similar values of Cc were obtained with control samples at similar (C+H)/L ratios. The creep index range was estimated at 0.02–0.03 for control and bioreactor samples in various states of decomposition. The magnitude of the biological degradation index (Cβi) depended on the degradation phase with the highest value of 0.19 obtained during the phase of accelerated methane production. Proposing a single Cc for landfill settlement calculations may lead to inaccurate predictions. Properties of each waste sublayer will change as a function of the decomposition stage, and dominating processes with appropriate compressibility parameters should be applied to individual sublayers.

1 January 2002 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Closed access
JLJianjun Leng
Jianjun Leng
MGMohammed A. Gabr
Mohammed A. Gabr
The characteristics of geogrid-reinforced aggregates over soft subgrade soil were investigated through a laboratory-testing program. Nine cyclic plate load tests were conducted with varying base layer thickness and reinforcement type. Results indicated that aggregate base course (ABC) degraded under cyclic loading as manifested by an increase in stresses at the interface between the ABC and the subgrade with increasing number of cycles. The improvement in stress distribution due to geosynthetic inclusion at the interface of ABC and subgrade soil is indicated by a decrease in the measured maximum stress (under the center of the loaded area) and the measurement of a more uniform stress distribution on the subgrade soil layer. The higher modulus geogrid provided a better load-spreading effect compared with a lower modulus geogrid used in the testing. The improvement in plastic surface deformation was related to two aspects: ( a) decrease in vertical deformation of the subgrade and ( b) decrease in lateral spread of the ABC. A model that incorporates the mechanics of reinforcement contributions to deformation and stresses and the effect of ABC degradation as a function of number of load cycles needs to be developed for the transportation community to fully realize the benefits of reinforcement in such an application.

1 December 2019 in Canadian Geotechnical Journal
Verified
Journal Article
Closed access
AZAtefeh Zamani
Atefeh Zamani
BMBrina M. Montoya
Brina M. Montoya
MGMohammed A. Gabr
Mohammed A. Gabr
Microbial-induced calcium carbonate precipitation (MICP) is a sustainable soil improvement method with the potential for improving the engineering properties of sand and silty soils and therefore their resistance to liquefaction-inducing events. Work presented herein experimentally investigates the changes in hydraulic conductivity of fine sands and silty sands as a result of MICP treatment. In addition, numerical modeling is conducted to assess the changes in allowable injection rate and radius of influence for the delivery of the MICP process at the field scale. The hydraulic conductivity of Nevada sand and silty sand with 15% fines content decreased through MICP application with the trend of reduction being similar for both soils. Numerical modeling results show that with the progress of the MICP process, injection rates can be increased for Nevada sand, but remain unchanged for Nevada sand with 15% silt content (after MICP treatment up to a shear wave velocity about 400 m/s.) The presence of fines by itself leads to generation of higher levels of pore-water pressure during the injection process, which necessitates higher strength improvement to prevent development of excessive plastic strains. Therefore, improvement in shear strength and stiffness relative to the magnitude of the hydraulic conductivity level and its rate of change during the MICP process is a key parameter in determining the radius of treatment.