9 September 2020 in Vehicle System Dynamics
Railway bogies of the Y25 family are the most common type of freight bogies used in Europe. However, this family of bogies presents poor curving performance and a derailment history. Although numerical simulations are a powerful tool to study railway dynamics, derailment scenarios involve complex operational and vehicle conditions that increase the multivariate aspect of the problem. Thus, simulating all possible scenario variants is unfeasible from the computational perspective due to time and computational constraints. This paper proposes an approach based on a Response Surface Methodology to study the combined influence of uncertain parameters on the derailment potential of a railway vehicle. The potential of this approach is demonstrated using a real derailment as a case study. A set of scenarios is identified using a Design of Experiments approach, and is simulated on a commercial software. The response functions of the quantities used to assess derailment are generated, and the conditions that maximise the derailment potential are identified. The results reveal a combination of asymmetric loading, excessive speed, and Lenoir link failure may cause extreme wheel unloading in the study developed. This work reveals the advantages of a Response Surface Methodology to identify the conditions that maximise the derailment potential.
24 November 2022 in Multibody System Dynamics
3 November 2023 in Multibody System Dynamics
The classical theory of continuum mechanics is formulated using partial differential equations (PDEs) that fail to describe structural discontinuities, such as cracks. This limitation motivated the development of peridynamics, reformulating the classical PDEs into integral-differential equations. In this theory, each material point interacts with its neighbours inside a characteristic length-scale through bond-interaction forces. However, while peridynamics can simulate complex multi-physics phenomena, its integration in the study of mechanical systems is still limited. This work presents a methodology that incorporates a peridynamics formulation into a planar multibody dynamics (MBD) formulation to allow the integration of flexible structures described by peridynamics into mechanical systems. A flexible body is described by a collection of point masses, in analogy with the meshless collocation scheme commonly used for peridynamics discretisations. Each point mass interacts with other point masses through nonlinear forces governed by a bond-based peridynamics (BBPD) formulation. The virtual bodies methodology enables the definition of kinematic joints connecting the flexible body with the neighbouring bodies. The implementation of the methodology proposed is illustrated using various mechanisms with different levels of complexity. Notched plates subjected to different loading conditions are compared with the results presented in the literature of the peridynamics field. The deformations of a flexible slider-crank mechanism compare well with the results obtained using a classical flexible MBD formulation. Additionally, three scenarios involving a rotating pendulum illustrate how the methodology proposed allows simulating impact scenarios. The results demonstrate how this methodology is capable to successfully simulate highly nonlinear phenomena, including crack propagation, in a multibody framework.
30 January 2023 in Multibody System Dynamics
Flexible multibody formulations allow the dynamic analysis of mechanisms with slender or thin-walled structures that deform during their operation. However, the majority of the existing flexible multibody methodologies are formulated assuming finite element models featuring 6 nodal degrees of freedom, specifically 3 translations and 3 rotations. This work initially revises the existing flexible multibody methodology in which the modeling of the flexibility is independent of the modeling of the baseline multibody system while ensuring the coupling between the rigid and flexible components. The flexible multibody methodology includes the use of suitable reference conditions, the component mode synthesis, and the virtual bodies methodology. Commonly, solid elements found in finite element software exclusively have three nodal translation degrees of freedom, featuring no explicit angular degrees of freedom. In this work, we propose the enhancement of the existing formulation for a rigid-flexible joint to support the use of virtual bodies rigidly connected to the nodes of solid elements. The computational implementation of the methodology is demonstrated using a benchmark case. The methodology developed in this work is further applied to study the dynamics of a locomotive with a flexible bogie frame. Although not influencing the overall vehicle dynamics, the bogie flexible multibody model allows the evaluation of the PSD of the accelerations in different points of the bogie that are sensitive to structural defects. The comparison of the response of healthy and damaged bogie frames supports the development of tools to monitor the condition of bogie frames during the operation. This development will be explored in forthcoming works, thus expanding the use of flexible multibody methodologies to new applications.
3 March 2023 in Vehicle System Dynamics
Multibody simulations are widely used for the dynamic analysis of railway vehicles, including the acceptance of vehicle running behaviour. Among these, the freight vehicles have, generally, friction damped suspensions for which numerical modelling is particularly challenging due to the contacting geometries, the intermittent contact, and the frequent stick-slip transitions. The impact of modelling decisions of friction-damped suspensions on the acceptance quantities for vehicle behaviour is the focus of this work. The selection of friction models and tuning of their parameters is challenging. In particular, the selection of friction coefficients is not straight forward, as friction conditions vary during operation and over time. This work aims to address both problems. A model of a friction-damped freight locomotive is used to simulate the dynamic response of the vehicle under realistic operation conditions and assess the impact of the friction modelling decisions. The results show that the use of different friction models provides similar results if the parameters are appropriately tuned. In contrast, the selection of friction coefficients significantly impacts the acceptance quantities, with emphasis on the wheel-rail forces at small radius curve transitions. The results recommend that the standard should include variations of the friction coefficients used for the friction-damped suspensions.
13 February 2025 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
The bogie frame is a safety–critical component of modern railway vehicles. Consequently, railway companies periodically inspect the bogie frame to guarantee a timely damage detection. Current inspection strategies could benefit from condition monitoring during the operation using adequate sensor systems and algorithms. However, the application of methods for damage detection using the bogie frame response is still limited. This work aims to identify the sensitivity of two complementary methods based on the transmissibilities—an updated form of the transmissibility damage indicator (TDI) method and the maximum occurrences (MO) method—to detect and locate structural damage. This analysis is supported by flexible multibody simulations that provide the nominal and abnormal response of a locomotive in realistic operational conditions. This work first assesses the effect of differences in track inputs on the sensitivity of the TDI method. Both the length of acceleration signals and the number and location of sensors are analyzed, from the perspective of the damage detection capacity. The results show that the TDI method successfully detects cracks with a moderate-to-large dimension, while the MO method identifies the region where those cracks occur. The transmissibility-based methods are a reliable technique that may contribute to enhance the inspection of railway vehicles.