The purpose of this paper is to investigate the benefits of using steel slag as an additive in Roller Compacted Concrete (RCC) which is a promising material can be used in streets, local roads, residential streets, high-volume roads, industrial access roads, airports...etc. The mechanical performances of steel scrap added reinforced cementitious composites produced with an industrial punch scrap. In specimen mixtures two types of scraps with diameters of 5 mm and 7 mm were used. The additive was mixed with 1%, 1.5% and 2% ratios by weight. Due to the results of the study, it was obtained that flexural strength properties of the specimens have increased up to 11%. In addition, freeze thaw effect of the specimens was investigated and found that 2% percent of scrap usage was given the best results.
31 December 2019 in European Journal of Science and Technology
Yollar, sosyal faydalarla birlikte, bir toplumda ekonomik kalkınmaya ve büyümeye katkıda bulunmada önemli bir rol oynar. Bu nedenle, bir ülkenin gelişmesinde hayati rolü bulunmaktadır. Dünyada karayolu uzunluğu 16,3 mil Km olsa da, her ülkeye bağlı olarak, yeni inşaat ve bakım ihtiyacı her zaman bir zorunluluktur. Öte yandan, küresel değişimler, asfalt endüstrisinin muaf olmadığı, sürdürülebilirlik çerçevesi içinde faaliyet göstermesi için tüm sektörleri baskı altında tutuyor. Bu nedenle karar vericiler atmosferi, insan sağlığını ve rahatlığını korumak için günlük düzenlemeler yapıyorlar. Bu koşullar altında, hükümetler ve akademisyenleri de içeren karayolu endüstrisinin tüm paydaşları, teknik iyileştirmeler ile düşük maliyetli, çevre ve insan sağlığı çözümleri arasındaki dengeyi sağlayarak, korumayı teşvik eden yeni teknikler ve materyaller aramaktadır. Herhangi bir "doğru" ürün, üretim, teknik, tesis, fon kullanımının değeri, bu bağlamda her paydaş için giderek daha önemli hale gelmektedir. Bu çalışmada yol kaplamalarındaki yeni teknolojik gelişmeler dikkate alınarak, sürdürülebilirlik bakımından değerlendirilmiştir.
15 July 2021 in Journal of Innovative Transportation
In pavement design and analysis processes among mechanistic-empirical pavement design method, defining the Dynamic Elasticity Modulus(E*) of asphalt layers are very important. In analysis processes, predicting the deteriorations and E* requires some special devices and a lot of time. To simplify this process different prediction models and different approaches have been developed to predict E*. These prediction approaches prepared with huge amount of input data gathered both from construction site and laboratory tests to predict the binder and the volumetric properties of the HMA. In this paper four prediction equations have been applied to predict E* and compared the results with each other. The infrastructure model has chosen as an existing highway section with known HMA material properties. The analyses have done for five different temperatures (10⁰F, 40⁰F, 70⁰F, 100⁰F and 130⁰F) by using two different frequency values (4Hz and 10 Hz). The aim of this research study is doing a comparative assessment of four widely used E* prediction models. Results have shown a large bias between compared E*prediction results due to temperature, frequency, and material properties. Higher Frequency and newest models have shown higher E* values.
31 December 2022 in Journal of Innovative Transportation
Transportation has a very wide effects either economic or social on human life. Millions of people are also working directly or indirectly for this industry. So, it is a mandatory for governments to evaluate their aspects on transportation construction, management, control and maintenance by increasing mobility. Also new technological developments and researches caused some changes in the expectations at many fields by new design and management approaches. The European Commission have supported some researches within Horizon 2020 program for new innovations to develop a highly efficient and effective cross modal transportation. In this paper recent developments at FOX (Forever Open Infrastructure Across all Transport Modes) program seeks to develop general methods for all transport modes and FOR (Forever Open Roads) program have reviewed. There are also benefits of FOR program that developed by Forum of European National Highway Research Laboratories (FEHRL) have mentioned and the outcome elements as automated, autonomous and resilient roads of the program have described.