Smartly designed nanoarchitectures with effective hybridization of transition metal oxides/hydroxides are promising to realize high performance electrodes for energy storage devices. To promote the applications of high-power supercapacitors, a seed-assisted method is firstly applied to prepare mesoporous Ni–Co–Mn hydroxide nanoflakes (NCMH) on nickel foam with practical mass loadings (higher than 5 mg cm−2). Further mechanism study reveals that the Ni(OH)2 nanorod arrays, which are firstly prepared by a hydrothermal process, serve as seeds for the successful deposition of NCMH nanoflakes. Through this convenient and cost effective method, this design results in a more orderly spatial distribution, lower intrinsic resistance and shorter electron transport pathways. The proof-of-concept application of NCMH as a binder-free supercapacitor electrode reveals an impressive specific capacity of 1043.1 μA h cm−2 at a high mass loading of 5.2 mg cm−2. The NCMH//activated carbon asymmetric device delivered a maximum energy density of 55.42 W h kg−1 at a power density of 750 W kg−1, exhibiting great potential as an energy storage device and shedding light on the structural design of nanomaterials.
6 February 2019 in Journal of Materials Chemistry A
Introducing porous conductive matrixes as a “host” for metallic lithium (Li) can restrain the growth of Li dendrites and accommodate the volume fluctuation during cycling. These two key factors severely impede the practical application of metallic Li anodes. However, uniformly pre-loading Li into such matrixes remains a great challenge. Herein, a facile thermal oxidation approach was employed to modify the surface of a Cu mesh from being lithiophobic to being lithiophilic. In particular, the Cu mesh was uniformly coated with a layer of CuO after thermal treatment and thus it became lithiophilic due to the strong interaction between CuO and molten Li. Through a melt infusion approach, metallic Li was homogeneously pre-loaded into the Cu mesh which could simultaneously induce a homogeneous distribution of the electrical field and accommodate the volume fluctuation of metallic Li during cycling. As a result, the Li–Cu composite anode demonstrated a stable cycling performance in a symmetric cell (1000 cycles at a current density of 10 mA cm−2) and a full cell paired with Li iron phosphate (90.8 mA h g−1 at 5C after 1000 cycles, 77.6% of initial capacity). Such a facile and cost effective approach provides a solution for the mass production of stable Li anodes with emphasis on lithiophilicity conversion of the surface of Cu.
In article number 1902915, Kaili Zhang, Wenjun Zhang and co‐workers investigate the impacts of anions and concentrations of a variety of Zn‐containing aqueous solutions on Zn stripping/plating efficiency. It is demonstrated that dendrite growth and byproduct formation can be suppressed during Zn plating, and the competitive hydrogen evolution reaction is restrained by using a 3 m Zn(CF3SO3)2 electrolyte. As a result, a high Zn stripping/plating efficiency is achieved. Furthermore, based on this electrolyte, a novel hybrid supercapacitor comprising Zn foil and porous carbon derived from chemically activated graphene is developed which delivers high energy density and an ultra‐long lifespan.