18 September 2023 in IEEE Transactions on Antennas and Propagation
A novel wideband high-gain air-filled waveguide fed antenna array is presented for millimeter-wave applications. A design scheme based on the optimized multistage phase cancellation with low complexity is investigated, which is able to weaken the undesirable in-phase superposition of small reflections in the array geometry, and thus significantly improving the achievable bandwidth of the large-scale array. The phase delay required for the proposed design method is obtained by introducing U-shaped bended waveguides in the feed network. Wideband 1 × 2 sub-arrays and E-plane waveguide T-junctions are also designed to build the array. A 16 × 16 array in the Ka-band is manufactured by employing metallic three-dimensional (3D) printing technology, which realizes excellent operating characteristics, including a bandwidth of 51.5%, a gain of up to 34.6 dBi, and stable unidirectional radiation patterns with cross polarization of less than -40 dB. The operating band of the proposed array covers multiple bands for 5G simultaneously, including n257, n258, n260 and n261. The proposed design method and antenna array would be attractive for emerging millimeter-wave applications.
6 June 2025 in IEEE Transactions on Antennas and Propagation
A novel three-dimensional (3D) printed double-ridge waveguide fed parallel-plate horn antenna array is presented for the fifth-generation (5G) millimeter-wave all-band coverage. By loading hourglass shaped ridges into the proposed horn radiators and metallic baffles at the ends of linear horn arrays, the quasi-TEM mode is excited over the radiation aperture throughout a wide bandwidth. Air slits are added between H-plane linear arrays to reduce the grating lobe level of the array. By the two means, an enhanced bandwidth with stable high-gain radiation is obtained by the proposed array without need of reducing element spacing. A theoretical analysis reveals that benefitting from a lower rate of change for the propagation constant of the used double-ridge waveguides, the frequency points where in-phase superposition of small reflections existing in full-corporate feed networks occurs shift towards higher frequencies. The intervals between adjacent frequency points with strong reflections are also enlarged. As a result, the number of undesirable strong-reflection points decreases in the target frequency range such that a superior bandwidth is obtained by the proposed large-scale array without increasing design complexity. A 16 × 16 array prototype with dimensions of 146 × 134 × 31.8 mm3 experimentally confirms excellent performance, including a bandwidth of 60% from 23.8 to 44 GHz, a gain of up to 34.7 dBi and stable radiation patterns, which is valuable to wideband backhaul and wireless access applications in 5G and beyond 5G (B5G).