We present an investigation on the generation of supercontinuum in the mid-infrared (mid-IR) spectral region. Namely, we study a silica-based anti-resonant hollow-core fiber which has good guidance properties in the mid-IR filled with supercritical xenon providing the necessary high nonlinearity. Our numerical study shows that by launching a 200 nJ pump of 100 fs centered at 3.70 μm, a supercontinuum that spans from 1.85 to 5.20 μm can be generated. Such sources are potentially useful for applications, such as the remote sensing of various molecules, medical imaging diagnosis, and surgery.
We propose a negative curvature hollow-core fiber that has a nested elliptical element in the antiresonant tubes. The additional elliptical element effectively adds two curvatures, namely, a positive and a negative curvature. Our numerical study shows that it enhances the confinement of the light in the core. Moreover, the nested elements provided an extra degree of freedom that can be exploited to suppress higher-order modes through the change of the ellipticity. The resulting low confinement loss and single-mode guidance properties of the proposed fiber make it a suitable candidate for applications in ultrashort pulse delivery and gas-based nonlinear systems.
A polarization maintaining ultra-low effective material loss based on slotted core kagome lattice fiber is proposed for terahertz (THz) wave propagation. Numerical study demonstrates that by using rectangular slotted air holes in the core of the kagome lattice exhibits simultaneously an ultra-high birefringence of 8.22 × 10 -2 , an ultra-low effective material loss of 0.05 cm -1 , and a very low confinement loss of 4.13×10 -5 cm -1 at the frequency of 1 THz. Further investigation shows that about half of the total mode power confines into the air slots at 50% core porosity. The proposed fiber can be used for polarization maintaining applications in THz regime.
We present empirical formulae that provide dispersion and effective area of the fundamental mode in hollow-core antiresonant fibers. The formulae draw on the structural parameters of the fiber and allow one to obtain the guiding properties over a wide spectral bandwidth, without the need for time consuming numerical simulations. The formulae are validated by comparing their results with those obtained using the finite-element method. We also analyze the effects of changing the number of antiresonant tubes, as well as adding nested elements in the antiresonant tubes on the guiding properties.
A double cladding nested antiresonant hollow core fiber is reported in this article. We demonstrated that the addition of nested elements in the second cladding ring and the proper optimization of structural parameters lead to the loss reduction by more than five orders. The numerical simulation exhibits a loss of less than ∼ 0.1 dB/km over the O, E, S, C, L telecom bands, with the minimum loss of 0.001 dB/km at 1.40 µm wavelength with a fiber core diameter of 33 µm. The fiber also shows a better performance in terms of bending loss as well as single modeness, and may have effective applications in a telecommunication system.
An octagonal photonic crystal fiber (PCF) with an elliptical shape in the center core is numerically investigated for residual dispersion compensation in the wavelength range 1460–1675 nm. The designed fiber exhibits flattened negative dispersion over the S + C + L + U wavelength bands and an average dispersion of with an absolute dispersion variation of . In addition, the proposed PCF shows a high birefringence of at the operating wavelength 1550 nm, which meets the requirement of high birefringence. Moreover, the variation of two air holes in the first ring up to 5% ensures an average dispersion of with a dispersion variation of , and birefringence reaches up to . Furthermore, to evaluate the sensitivity of the fiber dispersion properties, variation in the optimum parameters is studied.