To get the maximum power point (MPP), the algorithms developed in the literature fail for the most part when the atmospheric conditions vary rapidly. This paper presents the optimization by the swarm particles (PSO) of a sliding mode controller (SMC) to optimize photovoltaic systems (PV) evolving under the conditions of a rapid variation of the sunshine. The stochastic PSO algorithm is used in particular to determine the optimal gains of the sliding mode controller, and this algorithm guarantees the stability and global fast convergence of the system. Efficiency of the proposed hybrid algorithm is proved by using a Solarex MSX-60 module connected to a step-up DC-DC converter supplying a resistive load. The performances are compared to the conventional perturb and observe technique (P&O), PSO, CUCKOO, grey wolf optimization (GWO), and Whale Optimization Algorithm (WOA) in terms of convergence speed, i.e., 0.05 s, tracking speed after extreme change in irradiance 0.03 s, high Ability to track large changes in power before 1 s. Simulation results show that this technique is effective in conditions of a rapid variation of the irradiance.
30 July 2022 in Energy Conversion and Management: X
The aim of this work is to determine the parameters and characteristics of a PV module in case of partial shading conditions. Both numerical and analytical methods are used in order to attain this objective. The iterative method namely Newton-Raphson is used to evaluate the characteristics of the PV module under partial shading conditions at its peak point. For various shading conditions, the lost power by the module is evaluated in order to show the influence of the partial shading conditions. The combined analytic method with the iterative method used allowed fairly accurate results on the behaviour of the shaded PV modules with less difficulties compared to the analytical method alone.
28 September 2022 in International Journal of Energy and Environmental Engineering
This paper studies the behavior of three types of photovoltaic panels operating under partial shading conditions in the three climatic regions of Cameroon. The phenomenon of partial shading constitutes one of the factors which drastically disrupt the electric power produced by the photovoltaic generators. It is to contribute to solve this problem that we modelled the PV panels operating in partial shading conditions under the climatic parameters of the study area. The analytical method combined with the iterative method are used for the determination of PV module parameters under partial shading conditions. Studies were carried out over a period of one year in three cities, respectively: Yagoua for the sudano-sahelian region, Tchollire in the sudanese region and Tibati in the southern equatorial region. Three types of PV panels were used {polycrystalline (MSX-60), monocrystalline (Shell SP70) and CIS thin film (Shell ST40)}. The electrical power losses of each type of panel were evaluated.