2 March 2016 in Materials Research Letters
The development of microstructure and mechanical properties was investigated in a heavily cold-rolled and annealed AlCoCrFeNi2.1 high-entropy alloy. The as-cast alloy having a eutectic morphology consisting of alternate bands of ordered L12 and B2 phases was 90% cold-rolled. The deformed microstructure showed profuse shear banding and disordering of the L12, but no transformation of the B2 phase. A duplex microstructure consisting of ultrafine equiaxed grains (∼0.60 µm) of disordered face centered cubic and B2 was observed after annealing at 800°C. The annealed material showed remarkable strength–ductility combination having ultimate tensile strength ∼1.2 GPa and elongation to failure ∼12%. Impact Statement: AlCoCrFeNi2.1 eutectic HEA with ordered L12 and B2 phases can be thermo-mechanically processed to achieve ultrafine structure and remarkable strength-ductility properties. GRAPHICAL ABSTRACT
1 February 2006 in Journal of Materials Science
1 August 2008 in Materials Science and Engineering: A
8 April 2020 in Scientific Reports
Possibilities of enhancing mechanical properties of brittle intermetallic containing high entropy alloys (HEAs) using novel processing and microstructural design strategies were investigated in the present work. For this purpose, homogenized CoCrFeNi2.1Nb0.2 HEA consisting of FCC matrix and complex Laves phase particles was successfully processed by severe cold- or cryo-rolling to 90% reduction in thickness followed by annealing (800 °C/1 hour(h)). As compared to cold-rolling, cryo-rolling resulted in a finer lamellar nanostructure and decidedly greater fragmentation of the Laves phase. Upon annealing, the cold-rolled HEA showed a recrystallized FCC matrix dispersed with D019 structured ε nano-precipitates. In contrast, the finer nanostructure and greater driving force for accelerated precipitation of profuse nano-precipitates at the early stages of annealing inhibited recrystallization in the cryo-rolled HEA and resulted in the formation of heterogeneous microstructure consisting of retained deformed and recrystallized regions. The novel heterogeneous microstructure of the cryo-rolled and annealed HEA resulted in a remarkable enhancement in strength-ductility synergy. The present results indicated that cryo-rolling could be used as an innovative processing strategy for tailoring heterogeneous microstructure and achieving novel mechanical properties.
1 January 2020 in Materials Science and Engineering: A
8 May 2017 in IOP Conference Series: Materials Science and Engineering
The possibility of microstructural refinement and improvement of mechanical properties by severe cold-rolling was investigated in an AlCoCrFeNi2.1 lamellar eutectic high entropy alloy (EHEA). The as-cast alloy revealed fine scale eutectic mixture of L12 (ordered FCC) and B2 (ordered BCC) phases. During severe cold-rolling up to 90% reduction in thickness the B2 phase maintained the ordered structure, while the L12 phase showed the evolution of a nanocrystalline structure and progressive disordering. Annealing of the severely cold-rolled material resulted in the formation of duplex microstructures composed of two different phases with equiaxed morphologies and significant resistance to grain growth up to 1200°C. Annealing at 1000°C resulted in an optimum strength-ductility balance with the tensile strength of 1175 MPa and the total elongation of 23%. The present results showed that severe cold-rolling and annealing can impart very attractive mechanical properties in complex EHEAs.