1 December 2015 in Journal of Unconventional Oil and Gas Resources
1 September 2003 in International Journal of Rock Mechanics and Mining Sciences
1 December 2012 in Mineralogical Magazine
Corrosion, water radiolysis and microbial degradation will result in the generation of gas within repositories designed for the geological disposal of high-level radioactive waste. It is therefore crucial in the design of such facilities that the relevant mechanisms allowing gas migration through repository materials, both engineered barriers and clay-based candidate host rocks, are correctly identified. In Belgium, the Boom Clay represents a candidate host material for which the advective gas breakthrough characteristics and transport properties have been extensively tested and are well defined by numerous studies. The Boom Clay displays a significant capacity for self-sealing and both laboratory and field tests indicate that advective gas transport occurs not by visco-capillary flow, but instead through the formation of pressure-induced dilatant pathways. In this study, we present results from a gas injection test designed to demonstrate the presence of these features by injecting nanoparticulate tracers with helium gas into a sample of Boom Clay. The results provide conclusive evidence for the formation of transient, dilatant gas pathways within a candidate clay-based host rock. This technique provides a novel diagnostic tool for the identification of processes governing multi-phase flow, supporting robust long-term assessments of repository performance.
1 July 2003 in International Journal of Rock Mechanics and Mining Sciences
1 December 2012 in Mineralogical Magazine
To understand the fate and impact of gas produced within a repository for radioactive waste, a series of laboratory and field scale experiments have been performed on the Callovo-Oxfordian claystone (COx), the proposed host rock for the French repository. Results show the movement of gas is through a localized network of pathways, whose properties vary temporarily and spatially within the claystone. Significant evidence exists from detailed laboratory studies for the movement of gas along highly unstable pathways, whose aperture and geometry vary as a function of local stress, gas and porewater pressures. The coupling of these parameters results in the development of significant time-dependent effects, impacting on all aspects of COx behaviour, from gas breakthrough time, to the control of deformation processes. Variations in gas entry, breakthrough and steady-state pressures are indicative of microstructural heterogeneity which exerts an important control on the movement of gas. The localization of gas flow is also evident in preliminary results from the large scale gas injection test (PGZ) where gas flow is initially focussed within the excavation damaged zone (EDZ), which acts as a preferential pathway for gas. Numerical models based on conventional two-phase flow theory are unable to adequately describe the detailed observations from laboratory tests.
1 January 2014 in Geological Society, London, Special Publications
Understanding the mechanisms controlling the advective movement of gas and its potential impact on a geological disposal facility (GDF) for radioactive waste is important to performance assessment. In a clay-based GDF, four primary phenomenological models can be defined to describe gas flow: (i) diffusion and/or solution within interstitial water; (ii) visco-capillary (or two-phase) flow in the original porosity of the fabric; (iii) flow along localized dilatant pathways (micro-fissuring); and (iv) gas fracturing of the rock. To investigate which mechanism(s) control the movement of gas, two independent experimental studies on Callovo-Oxfordian claystone (COx) have been undertaken at the British Geological Survey (BGS) and LAEGO–ENSG Nancy (LAEGO). The study conducted at BGS used a triaxial apparatus specifically designed to resolve very small volumetric (axial and radial) strains potentially associated with the onset of gas flow. The LAEGO study utilized a triaxial setup with axial and radial strains measured by strain gauges glued to the sample. Both studies were conducted on COx at in situ stresses representative of the Bure Underground Research Laboratory (URL), with flux and pressure of gas and water carefully monitored throughout long-duration experiments. A four-stage model has been postulated to explain the experimental results. Stage 1: gas enters at the gas entry pressure. Gas propagation is along dilatant pathways that exploit the pore network of the material. Around each pathway the fabric compresses, which may lead to localized movement of water away from the pathways. Stage 2: the dendritic flow path network has reached the mid-plane of the sample, resulting in acceleration of the observed radial strain. During this stage, outflow from the sample also develops. Stage 3: gas has reached the backpressure end of the sample with end-to-end movement of gas. Dilation continues, indicating that gas pathway numbers have increased. Stage 4: gas-fracturing occurs with a significant tensile fracture forming, resulting in failure of the sample. Both studies clearly showed that as gas started to move through the COx, the sample underwent mechanical dilation (i.e. an increase in sample volume). Under in situ conditions, the onset of dilation (micro-fissuring) is a necessary precursor for the advective movement of gas.