It is estimated that 72% of the worldwide primary energy consumption is lost as waste heat. Thermoelectric Generators (TEGs) are a possible solution to convert a part of this energy into electricity and heat for space heating. However, for their deployment a proven long-term operation is required. Therefore, this research investigates the long-term stability of TEGs on system level in air and argon atmosphere under thermal cycling up to 543 K. The layout of the examined test objects resembles a TEG in stack design. The results show that the maximal output power of the test object in air reaches a plateau at 57% of the initial power after 50 cycles caused by an increased electrical resistance of the system. Whereas the test object in argon atmosphere shows no significant degradation of electrical power or resistance. The findings represent a step towards the understanding of the long-term stability of TEGs and can be used as a guideline for design decisions.
Due to the high computational burden and the high non-linearity of the responses, crashworthiness optimizations are notoriously hard-to-solve challenges. Among various approaches, methods like the Successive Response Surface Method (SRSM) have stood out for their efficiency in enhancing baseline designs within a few iterations. However, these methods have limitations that restrict their application. Their minimum iterative resampling required is often computationally prohibitive. Furthermore, surrogate models are conventionally constructed using Polynomial Response Surface (PRS), a method that is poorly versatile, prone to overfitting, and incapable of quantifying uncertainty. Furthermore, the lack of continuity between successive response surfaces results in suboptimal predictions. This paper introduces the Multi-Fidelity Successive Response Surface (MF-SRS), a Gaussian process-based method, which leverages a non-linear multi-fidelity approach for more accurate and efficient predictions compared to SRSM. After initial testing on synthetic problems, this method is applied to a real-world crashworthiness task: optimizing a bumper cross member and crash box system. The results, benchmarked against SRSM and the Gaussian Process Successive Response Surface (GP-SRS)—a single-fidelity Gaussian process-driven extension of SRSM—show that MF-SRS offers distinct advantages. Specifically, it improves upon the specific energy absorbed optimum value achieved by SRSM by 14%, revealing its potential for future applications.
The residential heating sector accounts for a large share of the worldwide annual primary energy consumption. In order to reduce CO2-emissions, it is therefore particularly important to analyse this sector for potential efficiency improvements. In Europe, natural gas boilers are the most widely used heating technology since they are cost-effective and can be installed in any type of building. The energy efficiency of these boilers is already high. However, in their internal process, heat is generated at a high temperature level which is only used for space heating and therefore a high amount of exergy remains unused. This research aims to develop the potential of using the exergy to further improve the efficiency of the systems. A novel combination of methods is applied to analyse the thermodynamic behaviour of gas-fired boilers in detail and over the cycle of a year. The analysis is performed in two steps: In the first step a system is examined in stationary operating points. This is carried out through an experimental setup and a three-dimensional numerical simulation. In the second step, the obtained data is applied to a transient annual building simulation. The results show the temporal distribution and total amount of the annual exergy loss for a common residential building. The exergy loss accumulates to 16,271 kWh per year, which shows the high potential to partially convert the exergy to electrical energy and significantly reduce the external electricity demand and CO2-emissions of the building. Based on this, new technologies such as Thermoelectric Generators can be developed, which can enable this potential.
At the German Aerospace Center (DLR), new transport and vehicle concepts for sustainable and user-friendly mobility are being researched. The Institute of Vehicle Concepts of the DLR developed a concept study of a modular and fully automated transport system. The so-called U-Shift enables the transport of different capsules as load carriers and changing them during operation without requiring additional infrastructure. This paper describes the vehicle concept and its project landscape developed in cooperation with other partners in order to picture the evolution towards real life testing. The latest prototype, U-Shift IV, was presented in April 2023 as a new research platform. The first active use case of the U-Shift was decided to be within a public area, in which a research operation is implemented over half a year. Testing prototypes in public areas brings new challenges for DLR in applying legal safety requirements as well as following new processes of assigning automated vehicles in Germany. Due to its interfaces and interactive research, the U-Shift concept of the DLR strongly addresses several TRA themes like user-centered transport or transport safety.