28 January 2026 in Food systems
Representatives of the genus Lactococcus are one of the key starter microorganisms in the dairy industry. They play a leading role in lactic acid fermentation in the production of fermented dairy products and cheeses. The article presents the results of a differentiated assessment of the enzymatic activity of nine strains of Lactococcus lactis subsp. lactis in milk at a cultivation temperature of (30 ± 1) °C, as well as during cooling and storage at a temperature of (6 ± 1) °C for 21 days. All studied parameters of acid formation (an increase in titratable acidity during fermentation and storage) demonstrated statistically significant differences between the strains (ANOVA, P < 0.05). The most pronounced variability of the strains was observed in their ability to acidify milk during storage: a decrease in the actual acidity over 21 days ranged from 0.19 to 0.49 pH units. This may be due to their genetic differences in enzymatic activity and resistance to low temperatures, which requires further study. The highest activity at (30 ± 1) °C was observed in four strains (663–12, 792–7, 618–5 and 549–1), which increased the titratable acidity of milk by 69–70 °T. Three of these strains (792–7, 618–5, and 549–1) slowly accumulated acid during storage, increasing the acidity by 4.7–7.3 °T over 21 days. Strains 637–4 and 429–6 showed a low fermentation rate at optimal temperature (an increase in acidity was 56.7 and 54.3 °T, respectively), but a high one during storage (an increase in acidity was 18.3 and 16.7 °T, respectively). Cluster analysis by the Ward method and the Euclidean distance metric performed in the R4.3.1 software environment allowed us to divide the studied L. lactis cultures into three groups according to the nature of the enzymatic profile at the temperature of active fermentation and under the storage conditions. The isolated clusters represent various metabolic profiles that determine the potential use of strains in technological processes. The results obtained indicate that for a comprehensive assessment of the acid-forming activity of cultures when selecting them for using in the composition of starter cultures of direct application for fermented dairy products and cheeses, it is necessary to study both the rate of acid formation and the post-enzymatic potential.
17 July 2024 in Food systems
The article presents the results of a study of the influence of monospecies gas-aroma-forming cultures Lactococcus lactis subsp. lactis biovar. diacetylactis (L. diacetylactis) and Leuconostoc subsp. on the peculiarities of pattern formation in cheeses with a low second heating temperature molded from a layer. The studied cultures were used at a dose of 0.6% of the total milk volume as as single starter microflora in the model cheeses (1-M and 2-M) and additional microflora along with the main lactococcal microflora (Lactococcus lactis subsp. lactis; Lactococcus cremoris) in the control cheeses (1-K and 2-K). The model and control cheeses were subjected to microbiological tests (total number of lactic acid microorganisms, number of L. diacetylactis and Leuconostoc subsp.), physicochemical (mass fraction of moisture, pH), biochemical (mass fraction of lactose) and organoleptic studies after pressing and during ripening at the age of 15, 30, 45, 60 days. It has been established that the use of a culture of citrate-fermenting lactococci L. diacetylactis ensures a stable lactic acid fermentation process during the production and ripening of the model and control cheeses, the formation of an elastic consistency and the desired pattern with eyes of a regular round shape. The use of the hetero-fermentative culture Leuconostoc subsp., as single starter microflora, does not guarantee the required level of lactic acid fermentation during cheese production and leads to an increase in the moisture content of the cheese mass after pressing and overacidification of the cheese in the first stages of ripening, which together contributes to the formation of an overly plastic consistency and an overdeveloped pattern in the form of cracks. The use of Leuconostoc subsp. as a gas-aroma-forming component of a traditional starter culture for semi-hard cheeses, also consisting of mesophilic lactococci Lc. lactis subsp. lactis and Lc. cremoris, causes the development of a nest-like pattern, which does not fully ensure the formation of the desired pattern with regular rounded eyes.
1 August 2026 in Food systems
Cheese whey is a large-scale by-product of milk processing, characterized by high biological value. However, its irrational use can lead to a serious environmental burden. One of the ways to solve this problem is the isolation of proteins and their fractionation, the efficiency of which significantly depends on the method used. In this work, a comparative assessment of four methods of processing reconstituted cheese whey (6.0 % dry matter mass fraction) was carried out, such as chitosan precipitation (pH 4.5; 20 °C; 1 % gel; 20 min), thermal acid coagulation (pH 4.65; 90 °C; 15 min) using lactic, citric, phosphoric and hydrochloric acids, cryo-acid precipitation (pH 4.5; –18 °C; 24 h) and ultrafiltration (spiral membranes with a cutoff threshold of 10 kDa). The study determined the proportion of precipitated protein, the fractional composition of soluble nitrogenous compounds using gel filtration, and specific operating costs. Ultrafiltration provided the highest efficiency of protein separation (65.92 ± 0.59 %), which also turned out to be an order of magnitude cheaper (≈112 rubles/m3) than all chemical methods. Among the thermal acid options, citric (57.83 ± 0.51 %) and hydrochloric (56.63 ± 0.55 %) acids proved to be the most effective. Chitosan and cryo-acid treatment showed low overall efficiency (26.51 ± 0.20 % and 25.30 ± 0.15 %, respectively). Analysis of the fractional composition of the supernatant showed that thermal acid coagulation and ultrafiltration completely removed β-lactoglobulin and BSA. Chitosan precipitation preserved the native profile of all major whey proteins, removing only ballast impurities. The cryoacid method demonstrated unique selectivity, virtually completely removing peptides while preserving native α-lactalbumin and β-lactoglobulin. A step-by-step fractionation strategy is proposed: treatment with chitosan to remove impurities, cryoacid separation of peptides, followed by isolation of native proteins by ultrafiltration or the thermal acid method.
30 September 2025 in FOOD METAENGINEERING
Introduction. The key factor determining the quality of cheeses is the balance of the starter microflora composition; the variability of the microorganism ratio can significantly affect the organoleptic profile of the product. An imbalance towards the predominance of leuconostocs over diacetyl lactococci can provoke defects: lack of a pattern, uncontrolled gas formation, taste defects. However, clear criteria for the optimal ratio of gas- and aroma-forming microorganisms have not yet been developed, which complicates the standardization of technological processes for the production of cheeses. Objective. Establishing the influence of varying the ratio of Lc . lactis subsp. lactis biovar diacetylactis and Leuconostoc in the composition of a polyspecies starter culture on the formation of the organoleptic profile of semi-hard cheeses, and determining the zone of optimal concentrations that minimizes the risks of defects. Materials and methods. The objects of the research were monospecific bacterial starters ( Lc . lactis subsp. lactis , Lc . cremoris , Lc . lactis subsp. lactis biovar diacetylactis , Leuconostoc subsp.); Dutch cheese after pressing, during maturation and at the stage of conditioned maturity. The mass fraction of total and water-soluble protein was measured by the Kjeldahl method. The degree of proteolysis was estimated by the ratio of water-soluble protein to total protein. The molecular weight distribution of soluble nitrogen compounds in the aqueous extract was determined by gel filtration. The mass fraction of lactose, galactose, glucose and lactic acid was determined using a capillary electrophoresis system. The flavor profile of cheeses was determined by the content of volatile aroma-forming substances in the vapor phase of cheese of conditioned maturity. Results. The use of Leuconostoc subsp. culture slows down the intensity of glycolysis at the production stage and proteolysis during the ripening process, and also reduces the total amount of volatile flavor and aroma substances and their diversity in cheeses of conditioned maturity, while increasing the amount of low-molecular peptides and amino acids in cheeses aged 60 days. Conclusions. It has been established that when introducing Leuconostoc subsp. in the composition of the polyspecies bacterial concentrated starter culture more than 20.0%, there are risks of deterioration of organoleptic indicators such as insufficient expression of cheese taste and aroma, smearing consistency, the appearance of a nest-like pattern and small cracks up to 15 mm and, as a consequence, a decrease in the grade of cheeses based on the overall score. The obtained results can be used by biofactories for scientifically based design of multispecies bacterial concentrated starters for cheese making.
22 October 2026 in Food systems
This article presents a comprehensive assessment of the biotechnological potential of Lactococcus cremoris (L. cremoris) collection strains for their differentiated use in starter consortia for the production of fermented dairy products. The relevance of this study stems from the need for targeted selection of cultures with a predictable metabolic profile, ensuring stable product quality during storage. This paper presents the results of multiparameter phenotypic profiling of nine L. cremoris strains based on key technological properties: acid-forming and syneretic activity, dynamic viscosity, and phage resistance. Significant differentiation among the strains was established based on the studied parameters. A stable inverse relationship was found between the intensity of acidification during fermentation and post-fermentation activity under refrigerated storage conditions. Hierarchical cluster analysis was used to identify three technological groups with different acid-forming profiles. All studied L. cremoris strains were shown to exhibit stable, positive viscosity dynamics during storage, indicating strengthening of the curd structure. Syneretic activity ranged from 2.8 to 5.5 cm 3 with a variation coefficient of 8.5 %. Most strains exhibited high phage resistance (7 of 9 strains demonstrated 100 % resistance, 2 strains demonstrated sensitivity of 4 % and 8 %, respectively). A differentiated strategy for using L. cremoris strains is proposed depending on the target product. Cluster 1 strains (T 15 8, B 7 23, K 18), characterized by prolonged post-fermentative activity, ensuring gradual acidification during ripening, are recommended for cheese production. Cluster 2 strains (K 143 23) are universal and suitable for a wide range of fermented dairy products. Strains of cluster 3 (319 30, 283 4, 418 8, 997 3) are optimal for sour cream and fermented milk drinks. They exhibit high enzymatic activity during the fermentation stage and low post-fermentation activity during storage. The proposed multiparameter clustering methodology can serve as an effective tool for scientifically based screening and design of specialized starter culture consortia for various types of fermented dairy products.
1 August 2026 in Food systems
The study is aimed at assessing risks of reducing the safety of semi-hard and soft cheeses during processing of milk containing residual amounts of antibiotics. Using the method of model production, the effect of six classes of antibiotics on the development of starter microflora and their distribution between the cheese dough and cheese whey in the technologies of Gollandsky and Adygeysky cheeses was studied. In order to make the analysis results informative, the amount of added antibiotics significantly exceeded the level standardized in raw milk: ampicillin – 35.0 mcg/kg; tetracycline – 250.0 mcg/kg; chlortetracycline – 250.0 mcg/kg; doxytetracycline – 250.0 mcg/kg; streptomycin – 4000.0 mcg/kg; ciprofloxacin – 50.0 mcg/kg; erythromycin – 2500.0 mcg/kg; chloramphenicol – 200.0 mcg/kg. Ampicillin was found to have the most pronounced bactericidal effect, leading to critical suppression of the starter microbiome. Streptomycin, erythromycin, and tetracycline exhibit moderate inhibition, while ciprofloxacin and chloramphenicol have no significant effect on starter cultures. Analysis of the proportional distribution of antibiotics from various groups showed that most of the studied antibiotics are predominantly transferred to the whey (at a level of 85–89 %), which corresponds to the whey-cheese mass distribution. The exception is tetracycline, up to 35 % of which is transferred to the cheese mass. The type of cheese is noted to be one of the determining factors for the final antibiotic content. In Gollandsky cheese, 50–55 % of tetracycline antibiotics (tetracycline, chlortetracycline, and doxytetracycline) accumulate in the cheese dough, posing a direct threat to consumers. In Adygeysky cheese, 81–88 % of the studied antibiotics migrate into the whey, which reduces the load on the cheese but leads to by-product contamination and poses a problem for whey recycling. The experimental data obtained highlight the need to consider not only the initial concentration of antibiotics in milk, but also their nature and the process parameters of cheese production when developing cheese safety management systems.