One-step purification and desalination: The purification of water for drinking purposes can require multiple filtration steps and technologies to remove contaminants such as salts and heavy metals. Some contaminants could have value if recovered, but these are often discharged in the waste streams. Uliana et al. describe a general approach for the fabrication of robust, tunable, adsorptive membranes through the incorporation of porous aromatic framework (PAF) nanoparticles into ion exchange membranes such as those made from sulfonated polymers. Salts are removed using a series of cation and anion exchange membranes, and the PAF particles can be selected to capture specific target ions, such as those of copper, mercury, or iron. This allows for simultaneous desalination and decontamination of the water. Science , this issue p. 296
17 January 2018 in Journal of Materials Chemistry A
Membrane-based nanotechnologies have gained growing attention in various separation fields due to advantages such as high energy efficiency and ecofriendliness. However, the limited and empirical design parameters of conventional membranes greatly slow down research progress on rapid and efficient molecular separations. Two-dimensional materials (2DMs) – e.g., graphene, MoS2, MXene, metal–organic frameworks, and covalent organic framework nanosheets – are rapidly emerging in the development of membranes with high selectivity and permeability. The rational tunability and precise control of interlayer distances and/or nanoporous apertures of 2DMs enable 2DM-based membranes to achieve highly specific separations. Furthermore, the ultrathin structure of 2DMs offers minimal transport resistance and thus leads to extraordinary flux rates. This review briefly outlines recent approaches in the use of various 2DMs for membrane designs. Some remarkable performances of 2DM-based membranes and their separation mechanisms are also noted. Challenges and future directions toward molecular-level designs of membranes with 2DMs are additionally discussed.
Microporous organic nanotubes (MONs) hold considerable promise for designing molecular-sieving membranes because of their high microporosity, customizable chemical functionalities, and favorable polymer affinity. Herein, we report the use of MONs derived from covalent organic frameworks to engineer 15-nm-thick microporous membranes via interfacial polymerization (IP). The incorporation of a highly porous and interpenetrated MON layer on the membrane before the IP reaction leads to the formation of polyamide membranes with Turing structure, enhanced microporosity, and reduced thickness. The MON-modified membranes achieve a remarkable water permeability of 41.7 L m−2 h−1 bar−1 and high retention of boron (78.0%) and phosphorus (96.8%) at alkaline conditions (pH 10), surpassing those of reported nanofiltration membranes. Molecular simulations reveal that introducing the MONs not only reduces the amine molecule diffusion toward the organic phase boundary but also increases membrane porosity and the density of water molecules around the membrane pores. This MON-regulated IP strategy provides guidelines for creating high-permeability membranes for precise nanofiltration.