Time-delays, model uncertainties, faults, and disturbances are frequently the main causes of performance degradation and instability in industrial process control. This article presents a fault-tolerant robust model predictive control design for processes that involve the above effects and process constraints. The uncertainties are modeled into a polytopic affine form based on variations in the system's parameters. A new model based on augmentation of the state variables and tracking error is used that provides increased degrees of freedom for the control design and guarantees tracking performance. A parameter-dependent Lyapunov Krasovskii functional is used to design a state-feedback control that reduces the conservatism of the conventional approach and ensures robust stability and tracking performance of the closed-loop system. At each sampling instant, a control action is computed by solving an online constrained optimization problem that minimizes the upper bound of the "worst-case" performance index. Finally, the proposed framework is employed for the fault-tolerant control of a continuous stirred tank reactor to demonstrate its effectiveness in mitigating actuator faults and tracking the desired set-point.
24 August 2021 in IEEE Transactions on Power Systems
A nonlinear robust fault detection scheme for synchronous generators in power systems is presented. The higher-order model of a synchronous generator having nonlinearity in dynamics is considered. A nonlinear observer-based fault detection (FD) scheme is proposed so that the designed FD is robust against disturbances, uncertainties, and sensitive to faults. To this end, a mixed $\mathcal {L}_{-}/\mathcal {L}_\infty$ induced norm-based framework is proposed, and various faults that are encountered in synchronous generators are investigated. The success of the proposed scheme is demonstrated through an application to IEEE 9-bus and 3-machine systems.
This paper shows the effectiveness of disturbance observer (DO) based sliding mode control (SMC) scheme as compared to traditional SMC. Both the methods are simulated for variable speed wind turbine (VSWT) to ensure asymptotic tracking of rotor speed even in the presence of disturbances. Two mass model of VSWT is derived which includes the damping effect of the rotor's blade and generator. The stiffness and damping effect of low-speed shaft are also taken into account while modelling the system. The dynamic model of VSWT contains both matched and mismatched uncertainties. Traditional SMC can only attenuate the effect of match uncertainties. The DO-based SMC overcomes the drawback of traditional SMC by attenuating mismatch uncertainties. In the proposed approach, a sliding manifold is chosen based on the estimation of an uncertain parameter (aerodynamic torque), which drives the system's states to equilibrium point in a finite time.