1 October 2021 in International Journal of Hydrogen Energy
8 January 2022 in Journal of Mechanical Science and Technology
28 April 2023 in Numerical Heat Transfer, Part A: Applications
A three-dimensional multicomponent multiphase (MCMP) thermally coupled lattice Boltzmann model (LBM) was developed to investigate the effect of water content on the effective thermal conductivity (ETC) of the gas diffusion layer (GDL) of a polymer electrolyte membrane fuel cell (PEMFC). A stochastic model was then used to reconstruct the 3D GDLs, and the effects of the material conditions on the heat and mass transfer characteristics were examined in detail. The results showed that the more the liquid water was saturated, the higher the estimated ETC of the GDL. When the wettability of the carbon fiber was constant, the distribution of liquid water played a more critical role in predicting the ETC.
30 June 2016 in Journal of Korea Technical Association of The Pulp and Paper Industry
18 October 2012 in IEEE Transactions on Magnetics
Recently, the demands for increasing memory capacities in hard disk drives (HDDs) has resulted in state-of-the-art technologies including heat assisted magnetic recording (HAMR) with significantly higher operating temperatures. HAMR results in swift degradation of current lubricant and carbon overcoat (COC) materials, leading to magnetic media corrosion which is detrimental to HDD operation. In addition, the lack of thorough understanding of the temperature profiles arising from the hotspot and energy management throughout these materials also exacerbates the problem. To address this issue, in this paper we will focus on the COC and investigate the transient heat transfer in various examples of nanoscale thin films when a hot spot is created via lattice Boltzmann method (LBM) since traditional conduction models like Fourier law are not accurate due to dominant sub-continuum effects. LBM originates from the Boltzmann transport equations (BTEs) and is computationally efficient due to easy parallelization with convenient handling of complex geometries. Our results of the heat transfer mechanism and temperature profiles show that Fourier equation under-predicts the peak temperature rise at the center of the hot-spot as the system size approaches the nanoscale domain. Applying LBM to a multilayered system, we observe a temperature slip along the interface of two materials indicated by the broken isothermal contours, as the heat is confined to a single layer. Using LBM, we then explore a novel graphene overcoat which has outstanding thermo-mechanical properties, and thereby extremely compatible in HAMR applications.
22 May 2015 in IEEE Transactions on Magnetics
Due to the nanoscale dimensions of the lubricant, overcoat, and media layers, the usual fast and efficient continuum models, such as Fourier law, fail to describe the thermal effects occurring during the heat-assisted magnetic recording (HAMR) operation. Furthermore, in order to couple the local heat transfer to air bearing surface dynamics, thermal energy distribution to the surrounding environment should be understood apart from the heat penetration in the carbon overcoat/media layers. To shed light on this issue, we developed a hybridized multiscale methodology that couples a modified continuum approach that is capable of accommodating nanoscale heat transfer effects, known as Guyer-Krumhansl equation (G-K), with a mesoscale level model based on kinetic theory via lattice Boltzmann method. This modified Fourier equation in G-K form incorporating parameters from the Boltzmann transport equation can accurately capture the nanoscale energy carrier dynamics while retaining the computational efficiency of the conventional models like Fourier law. We investigate the overall heat transfer mechanism originating from the laser hotspot onto the disk via analyzing the disk surface temperature distribution of a realistic media FePt grain surface, as well as the heat loss to the surroundings, including the air bearing environment via convection and radiation. Thus, we obtain a possible design criterion, which relates the grain size to the heat retention in the disk after a pulsing laser is focused. We found out that increasing the grain size may reduce the amount of time the heat is stored in the magnetic layer, thereby increasing the durability of the disk in the HAMR environment. Our study can provide novel design criteria for efficient heat sink materials, for effective thermal management in the disk, as well as improving the media durability via introducing optimized grain structure parameters, including shape and size for preserving lateral temperature gradients at the desired location in the disk during the HAMR operation.