The application of continuous fermentation with immobilized cells in brewing is a challenge because of problems with carrier selection and reactor design, which have economic impacts on the beer produced. Moreover, immobilization alters yeast physiology, which significantly affects beer flavor and aroma. Therefore, the aim of this study was to investigate the feasibility of a continuous fermentation system, consisting of a packed bed column bioreactor, containing lager brewing yeast, immobilized in alginate–chitosan microcapsules with a liquid core, in the primary beer fermentation. The results showed that the system entered in a stationary mode on the 3rd day and worked stably in this mode for 6 days. The “green” beer was taken at every 24 h at the output of the reactor and used for secondary fermentation with the yeast cells leaked from the capsules during the primary fermentation. The extract consumption, ethanol production, and pH change during primary and secondary fermentation were investigated. Some of the secondary yeast metabolites such as vicinal diketones, higher alcohols, esters, and aldehydes in “green” and final beers were determined and it was found that the flavor profile of the final beer was comparable to two industrially produced Bulgarian beers.
The stability and rheological properties of starchy dairy dessert creams thickened with corn, potato, wheat, rice, and tapioca starches were compared. A difference in structure was also reported in microscopic imaging. The stability of the creams was assessed by analysing the amount of liquid separated by centrifugation of the samples. Potato starch cream was found to have the least stability after 24, 120, and 240 hours of storage. Wheat starch shows the lowest retrograde properties. Rheological studies were performed at 50 °C in a controlled shear rate mode. The data show that all systems studied are non-Newtonian fluids. The resulting flow curves were analysed using the Herschel-Bulkley model. All creams are pseudoplastic, thinning liquids with time-varying properties. The consistency of creams thickened with rice and wheat starch is significantly more stable than those thickened with corn, potato, and tapioca starch, which was also confirmed by the calculated thixotropic areas.
In today?s dynamic development of food technologies it becomes necessary to study alternative sources of starch to replace the traditionally used ones. Characteristics such as granule size, gelling properties, retrogradation and rheology are fundamental for the selection of starch in the food industry. The aim of the present study is to investigate the possibilities for application of an emmer starch in food industry by comparing its main properties with two other cereal starches, isolated from rice and wheat. The results showed that the emmer starch had a similar granule size and structure, with increased amylose content as the wheat starch. This was also the reason for the similar gelling and retrograde properties as wheat starch. In terms of retrogradation, the highest results showed emmer starch and the lowest - rice starch. Emmer starch had the lowest onset temperature of gelatinization, and the peak temperature of gelatinization was 76.3?C. The starch gel obtained with emmer starch has the lowest viscosity but the most shear resistance compared to that with wheat and rice starch.
The effect of oat, almond and coconut milk compared with cow's milk on the rheological properties and stability of sugar-free starch creams was studied. The stability of the creams was assessed by centrifugation of the samples. It was found that creams with almond and coconut milk had the highest stability recorded on the 2nd, 5th and 10th day of storage. A comparison of the strength of the creams was analyzed by penetrometer. The cream with almond milk exhibited the highest strength and the lowest with oat milk. Rheological studies were performed at 50 °C in a controlled shear rate mode. The data showed that all systems studied are non-Newtonian fluids. All creams were pseudoplastic fluids. Creams with coconut and almond milk had the highest initial viscosity. Creams obtained with cow's and oat milk, on the other hand, had significantly higher stability. The energy value of the obtained creams was also calculated, with the highest values for cream with cow's milk, and the lowest values for coconut and almond milk.