The Cluster of Excellence “Centre for Tactile Internet with Human-in-the-Loop (CeTI)” deals with developments and inventions concerning smart devices used in many fields, e.g. industry 4.0, medicine and skill learning. These kind of applications require smart devices, sensors, actors and conductive structures. Textile structures address these applications by meeting requirements such of being flexible, adaptable and wearable. Within this paper, the development of a protective coating for electrically conductive (EC) yarns is captured. These EC yarns are nowadays often used for smart textile applications. One challenge in their application is the integration into textile structures. Often, the handling and use of EC yarns lead on the one hand to damages on the surface of the yarn and on the other hand to reduced electromechanically characteristics. This paper aims to characterize these EC yarns in regard to develop a suitable protective coating based on polypropylene (PP). To achieve this development, an extensive characterization of the EC yarns as well as the protective coating itself is important. The surface free energy (SFE), the topographical and the chemical characteristics are necessary for developing a suitable protective coating. However, the yarns are characterized before and after implementation into the textile structure and furthermore after the coating respectively with the developed finish.
The internet of things is a key driver for new developments in the fields of medicine, industry 4.0 and gaming. Consequently, the interaction of virtual and real world by smart interconnecting of devices in our everyday life is the basis idea of the Cluster of Excellence "Centre for Tactile Internet with Human-in-the-Loop" (CeTI) at TU Dresden. To enable a user-centric approach in CeTI innovative textile structures, mainly knitted smart gloves, and their functionalization by integration of sensors and sensory yarns are focus of research activities.
In the research field of smart textiles, one main goal concerns quantifying environmental forces acting on the wearer's body since textiles, acting as the boundary between the two, are an excellent way of integrating sensors. Integrating strain and pressure sensors into wearables promises a simple way of monitoring a person's posture and forces acting on their body. Sensors relying on a capacitive measuring principle are highly suitable for this, as they are less sensitive to changes in temperature than resistive or inductive types. In this paper, textile-based capacitive sensors are produced by braiding conductive yarns with and without an electrically insulating TPU sheath. The produced sensors are analyzed in cyclic strain and compression tests. Moreover, their behavior under changing temperatures is tested to prove their resilience against environmental changes. To extend their capabilities from an integral measurement to a localized assessment of the strain, time-domain-reflectometry (TDR) is employed. Finally, the sensors are integrated into a flexible actuated bending beam, and their adoption for soft robotics is discussed. Strain is tested cyclically, showing good long-term stability. Pressure sensitivity is measured in a static compression test under increasing force. TDR is used to localize strain in two discreet sections of the sensor. Although strain could not be quantified through TDR, characteristic points in the measured response signal indicating the position of the strain were identified. Textile-based capacitive sensors are suitable for strain up to 10 % and pressure up to 8 N. The determined gauge factors are satisfactory, with strain sensors inherently having a higher gauge factor than pressure sensors. Furthermore, they display good long-term stability and no adverse reaction to changes in temperature. TDR is proven to provide localization of strain in flexible sensors.
Current research focuses on advancements and breakthroughs in the realm of smart textiles, with applications spanning various industries such as medicine and education. For producing flexible smart textiles, electrically conductive yarns (EC) are needed to transmit signals or as part of sensor systems. Mostly, these EC consist of a polymer core with an outer metallized layer. Using EC in contact with skin requires high reliability and safety, and thus, the EC must maintain their functional properties on a long-term scale under a range of different stresses. The electrical properties of EC deteriorate under mechanical stress applied during production or in-use through damage to the yarn’s surface. At present, there are only partially feasible solutions to protect the metal-layer of the yarn surface. Hence, this paper presents a newly developed non-toxic coating (NTC) to protect the EC surface. The NTC consists of an aqueous emulsion with polypropylene wax and oxidized wax. To determine the long-term stability of the coating, the produced yarns undergo comprehensive evaluation using a range of analytical techniques. The aim is to identify the optimal coating by exploring different equipment and parameters. Additionally, it is various test methods to gauge the durability of the newly developed NTC used and ensure its reliability over time. To characterize the yarn properties before and after the coating, light microscopy (LM), washing processes, mechanical resistance tests and resistivity measurement are conducted.
Textile‐integrated strain sensors enable close‐to‐body motion monitoring, but performance depends strongly on textile architecture. Embroidered and weft‐knitted Smart Kinesiotapes incorporating the same silver‐plated polyamide yarn are compared using five specimens per configuration under cyclic elongation in increments up to . The effects of sensor geometry, sensing‐path length and knitting orientation on base resistance, drift and relative resistance change are evaluated. Vertical orientation reduces one‐line base resistance from to , corresponding to , and four‐line base resistance from to , corresponding to . Compared with the corresponding vertical structures, the relative resistance changes of the horizontal one‐ and four‐line variants are and lower, respectively. The vertical variants provide distinct cyclic signals and close temporal agreement with the applied strain. For the embroidered sensors, the straight geometry provides the largest response, whereas extending the sensing path to four lines increases base resistance without amplifying the relative response. The one‐line vertically knitted sensor provides the most promising combination of low base resistance, high sensitivity and signal interpretability. These findings provide design guidance for body‐conforming textile strain sensors.