1 February 2017 in Journal of Power Sources
13 October 2017 in Nano-Micro Letters
The exploration of low-cost and efficient bifunctional electrocatalysts for oxygen evolution reaction and hydrogen evolution reaction through tuning the chemical composition is strongly required for sustainable resources. Herein, we developed a bimetallic cobalt–manganese sulfide supported on Ni foam (CMS/Ni) via a solvothermal method. It has discovered that after combining with the pure Co9S8 and MnS, the morphologies of CMS/Ni have modulated. The obtained three-dimensionally hexagram-like CMS/Ni nanosheets have a significant increase in electrochemical active surface area and charge transport ability. More than that, the synergetic effect of Co and Mn has also presented in this composite. Benefiting from these, the CMS/Ni electrode shows great performance toward hydrogen evolution reaction and oxygen evolution reaction in basic medium, comparing favorably to that of the pure Co9S8/Ni and MnS/Ni. More importantly, this versatile CMS/Ni can catalyze the water splitting in a two-electrode system at a potential of 1.47 V, and this electrolyzer can be efficiently driven by a 1.50 V commercial dry battery.
18 February 2017 in Nano-Micro Letters
A flexible asymmetric supercapacitor (ASC) based on a CoAl-layered double hydroxide (CoAl-LDH) electrode and a reduced graphene oxide (rGO) electrode was successfully fabricated. The CoAl-LDH electrode as a positive electrode was synthesized by directly growing CoAl-LDH nanosheet arrays on a carbon cloth (CC) through a facile hydrothermal method, and it delivered a specific capacitance of 616.9 F g−1 at a current density of 1 A g−1. The rGO electrode as a negative electrode was synthesized by coating rGO on the CC via a simple dip-coating method and revealed a specific capacitance of 110.0 F g−1 at a current density of 2 A g−1. Ultimately, the advanced ASC offered a broad voltage window (1.7 V) and exhibited a high superficial capacitance of 1.77 F cm−2 at 2 mA cm−2 and a high energy density of 0.71 mWh cm−2 at a power density of 17.05 mW cm−2, along with an excellent cycle stability (92.9% capacitance retention over 8000 charge–discharge cycles).
1 March 2019 in Electrochimica Acta
1 December 2014 in Electrochimica Acta
1 August 2018 in Chinese Journal of Catalysis