Xin Chen

Xin Chen

Auto-generated profile, based on publicly available information

Xin Chen

Suzhou Univ Sci & Technol, Sch Civil Engn, Suzhou 215011, Peoples R China

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2018 in Journal of Performance of Constructed Facilities
Verified
Journal Article
Closed access
Guangdong ZhouGuangdong Zhou
Guangdong Zhou
Ting-Hua YiTing-Hua Yi
Ting-Hua Yi
BCBin Chen
Bin Chen
XCXin Chen
Xin Chen
An accurate correlation model between thermal loading and deformation is required for facilitating a reliable deformation-based condition evaluation in bridge service periods. In this paper, a general approach for modeling closed-form thermal correlation of deformation based on monitoring data is proposed and applied in a long-span arch bridge. First, samples of all available thermal variables and deformation induced by thermal loading are prepared by averaging preprocessed monitoring records at a 10-min interval. Then these available thermal variables are reduced to several predominant thermal variables, each of which represents a cluster of thermal variables with statistical similarity and has the strongest relationship with the thermal deformation in concern. Finally, the model of thermal deformation is formulated as a weighted sum of fitted functions of predominant thermal variables. The weighted coefficients are calculated by the back-propagation neural network technique combined with the mean impact value method and the fitted functions are estimated by the nonlinear least-squares method. The proposed approach is applied to 1 year of monitoring data obtained from a sophisticated structural health monitoring system deployed on the Jiubao Bridge. The proposed method is validated and a closed-form thermal correlation model of vertical deformation in the Jiubao Bridge is established.

15 January 2020 in The Structural Design of Tall and Special Buildings
Verified
Journal Article
Closed access
PDF file
XCXin Chen
Xin Chen
ALAiqun Li
Aiqun Li
ZZZhiqiang Zhang
Zhiqiang Zhang
LHLiang Hu
Liang Hu
PSPeng Sun
Peng Sun
XLXianming Liu
Xianming Liu

14 June 2011 in Earthquake Engineering and Engineering Vibration
Verified
Journal Article
Closed access
PDF file
YDYouliang Ding
Youliang Ding
XCXin Chen
Xin Chen
ALAiqun Li
Aiqun Li
XZXiaobao Zuo
Xiaobao Zuo

31 January 2021 in Wind Energy
Verified
Journal Article
Open access
PDF file
XCXin Chen
Xin Chen
AKAhsan Kareem
Ahsan Kareem
GXGuoji Xu
Guoji Xu
HWHao Wang
Hao Wang
YSYong Sun
Yong Sun
LHLiang Hu
Liang Hu
Recent installation of many wind turbines in earthquake‐prone areas worldwide has increased concerns regarding their seismic performance. This study introduces a multiobjective optimization design method using a modified Sigmoid satisfaction function to efficiently minimize the seismic response by installing tuned mass dampers (TMDs) on wind turbines. Inspired by the human decision‐making process, the modified Sigmoid function was utilized to improve the satisfaction function and balance the optimization objectives. Incorporating the particle swarm optimization algorithm resulted in lower sensitivity to the combination weighting factors and significantly reduced the effort required to calibrate the weighting factors for any practical multiobjective optimization problem. To verify the efficacy of the proposed methodology, a TMD was designed on a National Renewable Energy Laboratory (NREL) 5‐MW benchmark wind turbine, with constraints on both the top displacement and TMD stroke as design objectives. The results were compared to those obtained using the conventional linear weighted sum method, thereby highlighting the advantages of the proposed method. The scope of application of the proposed method is further demonstrated by a more complex TMD design problem involving 13 design objectives with typical seismic excitations.

26 January 2024 in Ocean Engineering
Verified
Journal Article
Closed access
SYShuo Yao
Shuo Yao
CLCong Liu
Cong Liu
XCXin Chen
Xin Chen
BTBaijian Tang
Baijian Tang
YSYong Sun
Yong Sun
ZZZhiqiang Zhang
Zhiqiang Zhang

28 January 2025 in Structural Control and Health Monitoring
Verified
Journal Article
Open access
WFWenwei Fu
Wenwei Fu
NKNaiwei Kuai
Naiwei Kuai
XCXin Chen
Xin Chen
SKShitang Ke
Shitang Ke
TLTao Liu
Tao Liu
ZSZhirao Shao
Zhirao Shao
Tuned liquid damper (TLD) is one of the main technologies for passive control. The fundamental modal parameters of a TLD contain natural frequency and damping ratio, which are primarily related to the liquid height in the TLD device. Although the liquid height of the TLD is calibrated before installation, it is still necessary to identify the physics parameters of the TLD and the main structure during the service period to prevent the detuning of the TLD. A physics parameter identification method for the structure‐damper‐coupled system based on mechanics‐enhanced stochastic subspace identification (SSI) is proposed in this paper, illustrated through annular TLD (ATLD). By extracting the state matrix of the first controlled mode of the main structure, the natural frequency and damping ratio of the ATLD are identified, thereby determining the liquid height of the ATLD. Numerical models of structure‐ATLD‐coupled systems with different degrees of freedom are constructed, and their simulated acceleration responses under different excitations are obtained. Sensitivity analysis of environmental noise is performed to verify the accuracy and robustness of the proposed parameter identification method. A dynamic test was designed for a steel chimney model to further verify the practicality of this method. The results show that when the noise level of the measurement noise is below 5.0%, the average relative error in identifying the ATLD liquid height does not exceed 10%. The identification error in the damping ratio of the structure‐ATLD‐coupled system will lead to a decrease in the accuracy of ATLD liquid height estimation. The proposed method can effectively identify changes in the ATLD liquid height within the optimal frequency ratio range by analyzing the experimental data from the chimney model. The proposed method can effectively estimate the modal parameters of the coupled system, providing reliable data support for evaluating the working condition of the ATLD during its service period.