9 June 2022 in International Journal of Marine Engineering Innovation and Research
Effect of Single Slat and Double Slat on Aerodynamic Performance of NACA 4415
7 November 2024 in Mechanical Engineering for Society and Industry
This study focused on the optimization of air suspension systems (ASs) for road vehicles concerning on-ride and handling criteria. A quarter DOF vehicle model is used in this study to develop an optimized system based on nonlinear equations. The extracted equations are then linearized and transformed into dimensionless form to gain insights into the system's behavior. By employing the Root-Mean-Square (RMS) method, the dimensionless equations are utilized to optimize the system parameters focused on stability and ride comfort. The five main components are attached in the model which consisted of the sprung mass (SM), unsprung mass (USM), gas spring (GS), auxiliary reservoir (AR), and orifice (O). The optimization procedure involved adjustment to the orifice resistance coefficient, air spring volume, air spring area, and auxiliary volume using the RMS-based method. Simulation analysis revealed the superior performance of the RMS-optimized system in both ride quality and handling. The study concludes by emphasizing the advantages of utilizing the RMS method for optimizing air suspension, resulting in decreased sprung mass acceleration and enhanced handling qualities. Selecting the appropriate design point for the suspension system based on the method outlined in this article can ensure both stability and comfort in the vehicle simultaneously.
4 December 2025 in Jurnal Pendidikan Fisika dan Teknologi
MHMuhammad Paraj Azhar Hardian
Muhammad Paraj Azhar Hardian
LLLiemalasintasari Liemalasintasari
Liemalasintasari Liemalasintasari
Inductors have a significant influence on the volume, weight, cost, and performance efficiency of converters. In boost converters, the size of the inductor greatly affects the overall size of the converter. In recent years, there has been an increasing number of researches focusing on modeling power losses in magnetic elements and on the influence of power losses in these elements on the characteristics of electronic equipment. Boost converters often operate under non-ideal conditions, when the switch is active for a long period of time (Switch ON), conduction losses increase, high current ripple occurs, and the switch operating cycle is extreme. The magnitude of current ripple in a boost converter will greatly affect the amount of power loss generated in the inductor or MOSFET. Given this, it is important to consider the inductor's ability to overcome power losses that will affect the performance of the boost converter. This research analyzes the effect of inductor size, voltage, current, and efficiency related to the duty cycle. The purpose of this research is to find the highest efficiency by varying the diameter of the inductor wire. The diameter of the inductor wire will affect internal resistance and power dissipation, which will have an impact on the performance of the boost converter. Based on the research results obtained, a diameter of 1.5 achieved the most optimal performance with an efficiency of 69.05. Increasing the diameter of the inductor will improve its ability to store current and reduce internal resistance, thereby overcoming the magnitude of current ripple , reducing power losses due to heat, and converting energy efficiently.