4 March 2024 in IEEE Transactions on Geoscience and Remote Sensing
Ground Penetrating Radar (GPR) is a non-destructive detection technology based on electromagnetic waves. However, the presence of clutter during the data acquisition process has a serious impact on the quality of GPR B-scan images. In particular, when strong clutter such as rebar mesh is present in the surface layer of the road area being scanned, it can be challenging to locate and identify road defects such as voids and faults in the acquired images. To suppress the surface rebar clutter and recover the disturbed defect echoes, we designed an unsupervised SuppRebar-GAN network. Meanwhile, to verify the accuracy of the location and type of its recovered echoes, we also set up an EC-Yolov7 network to localize and identify the recovered echoes and generate corresponding heatmaps based on the detection results to estimate the true location of the roadway defect in the subsurface. In this study, simulated and measured data of four typical road defects, namely void, fault, uncompact, and crack, were collected for training and testing the two networks. The experimental results show that both networks can perform their respective functions excellently without retraining in the face of test datasets collected in other simulations or real test scenarios that are very different from the initial training set.
18 April 2025 in IEEE Geoscience and Remote Sensing Letters
When using ground penetrating radar (GPR) to detect targets below shallow rebar mesh in reinforced concrete structures, the strong scattering characteristics of rebar mesh causes distortion and interference of targets echoes and leads to imaging artifacts and degradation. This letter proposes a coarse-scale and fine-scale dual-branch imaging enhancement network (CFD-IENet) to achieve target imaging under rebar mesh in reinforced concrete by combining Bscan echo data enhancement with BP imaging result enhancement. First, a residual U network (Res-U) suppresses complex background clutter in Bscan data to improve the signal-to-noise ratio. Then, a coarse-scale and fine-scale dual-branch network is constructed to enhance both Bscan and BP imaging. In the Bscan enhancement stage, strong and weak signals are trained separately, aiming for surface rebar echo interference in reconstructing weak target signals beneath the rebar mesh. In the BP imaging enhancement stage, artifacts and multipath ghosts are suppressed to enhance occluded target imaging. A bilinear fusion module (BFM) is designed to facilitate global feature interaction, promoting the fusion of Bscan and BP imaging features across scales, thereby improving reconstruction and enhancement accuracy. Experimental results on cracks occluded by rebar mesh demonstrate the method’s effectiveness, showing a 4.73dB improvement in PSNR and a 0.16 improvement in SSIM compared to the RNMF+BP+Unet enhancement method.
12 January 2026 in IEEE Transactions on Geoscience and Remote Sensing
This paper proposes the Forward-Guided and Reverse-Resampling (FG2R) diffusion framework to address two significant challenges in analyzing Ground Penetrating Radar (GPR) B-scan data: (i) B-scan distortion caused by missing A-scans and large-area occlusions, and (ii) scarcity of high-quality training samples. This framework combines forward-guided noise injection with reverse-resampling inference to achieve B-scan restoration and generation. During the forward phase, a physics-based classifier guides noise injection into target regions, adhering to the non-stationary statistical properties of GPR echoes. In the reverse phase, a masked resampling strategy precisely allocates denoising steps to critical areas while preserving the continuity of hyperbolic structures. Extensive B-scan restoration and generation experiments were conducted across multiple simulated and real datasets. FG2R’s performance was evaluated using metrics including PSNR, SSIM, FID, NMSE, SCCS, and FFT/STFT spectral consistency. Results demonstrate FG2R’s stable performance across diverse restoration and generation tasks. Compared to mainstream baseline models, FG2R achieves an average PSNR improvement of approximately 5 dB, an SSIM gain of 0.06, and a reduction in FID of about 30%. These results demonstrate that FG2R can generate reliable, value-added samples while ensuring high-fidelity structural recovery, laying a practical foundation for data-driven GPR applications.
14 October 2024 in IEEE Transactions on Geoscience and Remote Sensing
Shape change detection is crucial for monitoring structural defect evolution. However, variations in temperature and precipitation dynamically alter the dielectric properties of structural defects and underground soil media, impacting the position and shape of scattering curves in ground penetrating radar (GPR) Bscan. This poses a challenge in determining the shape of the changing area by using dual-time GPR Bscan comparisons. To extract the structural defect features and shape change detection under changing backgrounds, this paper proposes a change detection network based on GPR Bscan (GPR CDNet). This method includes an encoder-decoder structure. In the encoder, we design a multi-scale and multi-dilated convolution (MSMDconv) to construct a pseudo-Siamese backbone feature extraction network to enhance contextual understanding and capture fine-grained details. Furthermore, to improve the accuracy of reconstructing the shape of the changing region, the feature transformation module (FTM) is designed to convert Bscan features into spatial model features to enhance the representation of change feature information. The Bscan features are then fused with the spatial model features and input into the decoder to reconstruct the shape of the changing area. In addition, this paper conducts experiments in the background medium and structural defect relative permittivity changes, rebar shielding, and actual sandbox scenarios. The results show that the network can adapt to the changes in the background medium’s relative permittivity and the structural defects’ relative permittivity and reconstruct the regional shape of structural defects that change over time with better F 1 performance and less computational complexity.