In Republic of Korea, cracks in concrete structures are considered to be objective structural defects, and the constant maintenance of deteriorating facilities leads to substantial social costs. Thus, it is important to develop technologies that enable economical and efficient building safety inspection. Recently, the application of UAVs and deep learning is attracting attention for efficient safety inspection. However, the currently developed technology has limitations in defining structural cracks that can seriously affect the stability of buildings. This study proposes a method to define structural cracks on the outer wall of a concrete building by merging the orthoimage layer and the structural drawing layer with the UAV and deep learning that were previously applied during a safety inspection. First, we acquired data from UAV-based aerial photography and detected cracks through deep learning. Structural and non-structural cracks were defined using detected crack layer, design drawing layer defined the structural part, and the orthoimage layer was based on UAV images. According to the analysis results, 116 structural parts cracks and 149 non-structural parts cracks were defined out of a total of 265 cracks. In the future, the proposed method is expected to greatly contribute to safety inspections by being able to determine the quality and risk of cracks.
Information on the location of cracks in concrete structures is an important factor enabling appropriate maintenance or reinforcement measures to be taken. Most studies related to concrete cracks are limited to crack detection and identification, and studies related to crack location information are insufficient. The novelty of this study is to develop application technology related to crack localization by proposing a methodology that can estimate the location of concrete cracks even when reference objects or feature points are lacking using an unmanned aerial vehicle and image processing techniques. For the development and verification of the proposed method, aerial photography and image acquisition were performed using mounting a laser pointer model on an unmanned aerial vehicle. To build the analysis data, image distortion correction and feature point extraction were performed using the homography matrix and scale-invariant feature transform algorithm. Spatial information was established using the point cloud technique and image stitching technique, and crack localization was estimated using generating crack expression data via layer merging. The proposed method was validated using comparison with field-measured data. In the future, the proposed methodology can be utilized for supplementing and improving the conventional methods for visual inspection of infrastructures and facilities.
27 October 2022 in Journal of Korean Society of Steel Construction