Per‑ and polyfluoroalkyl substances (PFAS) exhibit extreme thermal persistence, and current laboratory thermal destruction systems often depend on high temperatures while offering limited control over gas‑phase residence time and spatial heat distribution. These limitations complicate defluorination, hinder fluorine mass‑balance closure, and promote formation and release of fluorinated intermediates. To clarify how process and reactor design, not nominal operating temperature alone, governs PFAS breakdown, this study systematically evaluated temperature, residence time, carrier‑gas environment, and reactor thermal uniformity using batch reactors and a novel controlled‑residence time reactor system. Batch experiments at moderate temperatures are used to isolate intrinsic behavior and identify the conditions under which neat PFAS can undergo substantial mineralization. Insights from these tests inform the design of an isothermal and a non‑isothermal controlled‑residence time reactor configured to retain volatilized intermediates within the heated zone while enabling continuous operation. Comparative evaluation of conventional flow‑through and controlled‑residence time modes demonstrates that the ability to maintain extended gas‑phase exposure and suppress axial thermal losses strongly influences the extent of defluorination and the recovery of fluorine‑containing products. The results collectively highlight how reactor architecture and residence‑time control can expand the operational window for moderate‑temperature PFAS treatment and provide a framework for designing scalable thermal systems with improved mass‑balance recovery.