14 August 2024 in Science Robotics
Wheels have been commonly used for locomotion in mobile robots and transportation systems because of their simple structure and energy efficiency. However, the performance of wheels in overcoming obstacles is limited compared with their advantages in driving on normal flat ground. Here, we present a variable-stiffness wheel inspired by the surface tension of a liquid droplet. In a liquid droplet, as the cohesive force of the outermost liquid molecules increases, the net force pulling the liquid molecules inward also increases. This leads to high surface tension, resulting in the liquid droplet reverting to a circular shape from its distorted shape induced by gravitational forces. Similarly, the shape and stiffness of a wheel were controlled by changing the traction force at the outermost smart chain block. As the tension of the wire spokes connected to each chain block increased, the wheel characteristics reflected those of a general circular-rigid wheel, which has an advantage in high-speed locomotion on normal flat ground. Conversely, the modulus of the wheel decreased as the tension of the wire spoke decreased, and the wheel was easily deformed according to the shape of obstacles. This makes the wheel suitable for overcoming obstacles without requiring complex control or sensing systems. On the basis of this mechanism, a wheel was applied to a two-wheeled wheelchair system weighing 120 kilograms, and the state transition between a circular high-modulus state and a deformable low-modulus state was realized in real time when the wheelchair was driven in an outdoor environment.
12 May 2021 in IEEE Transactions on Robotics
Robotic manipulators require contact force sensing capabilities to sense the contact force between the manipulator and an object. Specifically, for humans and robots to coexist in the work environment, the robot must be able to detect an external force applied by a human. This study presents a new intrinsic force sensing method for robot manipulators that can obtain accurate information of the external force applied by a human during human–robot interaction. The method employs a robot cover, which is typically utilized in robot manipulators. Unlike conventional force sensing methods, a six-axis force/torque sensor is placed between the cover and the link of the robot manipulator. As a result, the proposed method provides information of the three-axis contact force applied to the cover surface and its contact location. Therefore, the cover itself becomes a sensorized cover based on the intrinsic force sensing method. To evaluate its sensing performance, the sensorized cover is experimentally validated using reference sensors. Finally, an experiment is performed in which the robot successfully recognizes letters written on the cover, indicating a high level of contact force sensing performance.
22 April 2022 in IEEE Robotics and Automation Letters
In recent years, human-robot cooperation has enhanced productivity and achieved high payload, speed, and accuracy. Integrating typical industrial robots in human-robot cooperation is challenging because their arms may cause serious injuries to humans during a collision due to malfunction or errors due to robot operators. Therefore, counterbalance robot arms that are capable of counterbalancing the gravitational torques due to the robot mass have been developed to decrease the required capacity of the motors and speeds of these robots. In this research, we propose an advanced counterbalance mechanism using gear units and springs to improve the durability and reliability compared to the previously proposed wire-based counterbalance mechanism, which is difficult to apply to a commercialized product because it can easily be broken or stretched when an excessive force is applied for a long period. Moreover, our proposed method was extended to a multi-DOF system using a parallelogram mechanism based on a timing belt and pulleys to achieve multi-DOF robotic arms. A 2-DOF counterbalanced arm was designed to verify the effectiveness of the proposed mechanism. The simulations and experimental results showed that the proposed mechanism effectively reduced the gravitational torques of each joint of the multi-DOF arm.
11 May 2022 in IEEE Access
A monitoring system is essential for controlling temperatures under safe levels of operation. It is often challenging to attach temperature sensors directly to drive chips owing to the operating environment or geometric challenges. Based on this motivation, we present a model-based virtual thermal sensing technique for the real-time temperature monitoring of the electronics package. A few real sensors located far from the target position are utilized in this virtual sensing system. These are then connected to a well-tuned finite element model for data augmentation utilizing an inverse heat conduction framework. Therefore, the virtual sensor allows us to estimate the temperature without the aid of a sensor installed inside. However, this technique has a stability issue because it is classified into an inverse problem (i.e., an ill-posed problem). We propose a Tikhonov regularization method to address this challenge, including an efficient ridge estimator. The ridge estimator is used to select an optimal regularization parameter so that we can obtain the stable and reliable inverse solution. Since conventional ridge estimators rely on total transient errors, they require a significant computation. The proposed estimator is based on the bias and variance errors, not the total errors, which allow us to efficiently find the optimal parameter. In this paper, the thermal model is modeled using the finite element method, and the Krylov subspace-based model order reduction is employed to reduce the computational burden. Finally, the proposed virtual thermal sensor was experimentally validated utilizing a sealed cylindrical structure in which the commercial servo drive operated.
17 March 2021 in IEEE Access
Compliance devices facilitate robotic assemblies by preventing excessive contact force on automated devices. However, the unavailability of displacement information regarding compliance devices makes it difficult to protect robots and objects during robotic assembly. It also limits repeatability and efficiency, especially regarding peg-in-hole and similar operations. We propose a six-axis displacement sensor installed on a remote center compliance device to detect the three translation and three rotation components generated by external forces and torques applied to the device, respectively. Triangular prism-shaped structures are used with capacitive sensing technology to measure the vertical and horizontal displacements in mm scale generated by the external normal and shear forces applied to the sensor. We designed and fabricated the sensor that could be integrated into a remote center compliance device, demonstrating it has a simple structure and is easy to install. To obtain six-axis force/torque information and six-axis displacement, calibration experiments were conducted using a specific setup and considering the device's geometry. The high sensing performance was verified through complementary experiments.
1 March 2014 in Transactions of the Korean Society of Mechanical Engineers - A