Yue Qin

Yue Qin

Auto-generated profile, based on publicly available information

Yue Qin

School of Electrical and Information Engineering, South China University of Technology, Guangzhou, China

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 December 2021 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
YQYue Qin
Yue Qin
RLRonglin Li
Ronglin Li
QXQuan Xue
Quan Xue
XZXiuyin Zhang
Xiuyin Zhang
YCYuehui Cui
Yuehui Cui
A new approach is proposed to develop aperture-shared dual-band antennas using partially reflecting surfaces (PRSs). A fully aperture-shared dual-band antenna consisting of a low-band antenna (LBA) and a high-band antenna (HBA) right below the LBA is first investigated. The aperture sharing has little influence on the LBA but causes a severe shielding effect on the HBA. To alleviate the shielding effect, a low-pass PRS is inserted between the LBA and HBA, forming an air-filled quasi-Fabry–Perot cavity, which can make compensation for the radiation from the HBA but with little influence on the LBA. The second PRS is introduced above the LBA to enhance the bandwidth (BW) for HBA. It is shown that the fully aperture-shared dual-band antenna achieves an impedance BW ( $\vert \text{S}11\vert < -15$ dB) of ~43.7% (0.68–1.07 GHz) for the LBA and ~45% (1.7–2.7 GHz) for the HBA with an average gain of ~8 dBi and stable radiation patterns. Based on the PRSs, an aperture-shared dual-band antenna subarray is finally developed for base-station applications, which covers the frequency bands of 0.68–0.96 and 1.7–2.7 GHz for 2G/3G/4G mobile communications.

24 August 2018 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
YCYuehui Cui
Yuehui Cui
YNYao Niu
Yao Niu
YQYue Qin
Yue Qin
RLRong Lin Li
Rong Lin Li
A new broadband flush-mountable dual-polarized antenna with very high isolation is proposed. The antenna is made up of a pair of crossed slots, which are fed by two orthogonal microstrip feedlines. A metallic cavity is introduced to back the slot antenna for unidirectional radiation pattern. By setting the microstrip feedlines on two substrate layers separated by a metal ground on which the crossed slots are etched, the antenna achieves a high isolation of 40 dB. The antenna has a broad bandwidth of about 47%, which is due to the wide crossed slots and the impedance matching of the feedlines. It is shown that the antenna can be easily flush-mounted on a metal surface without affecting the high isolation and the broad bandwidth performance. The proposed antenna may be used as flush-mountable antennas in wireless sensor/communication systems for high-speed vehicles/aircrafts.

4 March 2019 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
YQYue Qin
Yue Qin
XMXiaolong Mo
Xiaolong Mo
RLRonglin Li
Ronglin Li
TWThomas T. Y. Wong
Thomas T. Y. Wong
YCYuehui Cui
Yuehui Cui

20 September 2017 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
Verified
Journal Article
Closed access
ZYZewei Yuan
Zewei Yuan
YQYue Qin
Yue Qin
CDChunli Deng
Chunli Deng
PZPeng Zheng
Peng Zheng
With an increase in extreme and complex work conditions in the fields of aircraft industry and high-speed train, single surface strengthening or single surface machining is not satisfactory with repeated requests of spherical plain bearings, which results in serious wear. Therefore, in this paper, a compound method of ultrasonic surface rolling process and surface texture was proposed on the basis of investigating the wear mechanism to meet the tribological property requirements of spherical plain bearings. The theoretical and experimental results show that low micro-hardness and low shear strength of surface material, rough surface, and poor lubrication are the important factors contributing to the wear of spherical plain bearings. The surface roughness Ra and Rz of processed spherical plain bearings are reduced to 0.02 µm and 0.14 µm from 0.35 µm and 2.1 µm, respectively, and the micro-hardness of surface material is increased by about 20%. The double-sine micro-textures with the width of 120 µm and the depth of 20 µm produced by laser machine, together with the circular groove, provide satisfactory lubrication for the spherical plain bearings. Finally, the wear resistance properties of spherical plain bearings were increased by more than 55%. The proposed synergistic methods have great advantages in improving the tribological properties of key fundamental components, especially for spherical plain bearings.