10 May 2024 in RSC Advances
The release of toxic azo dyes pollutants in the environment from different industries represents a public health concern and a serious environmental problem. Therefore, the conversion of hazardous methyl orange (MO) azo dye to environmentally benign products is a critical demand. In this work, an eco-friendly Prussian blue analogue (PBA) was synthesized and its catalytic activity toward the reduction of MO was investigated. The PBA copper(II) hexacyanocobaltate(III) (Cu3[Co(CN)6]2) was synthesized by a facile inexpensive chemical coprecipitation method without using hazardous solvents. The nanocatalyst was characterized using XPS, Raman, FTIR spectroscopy, and XRD. The chemical reduction of MO using NaBH4 and the PBA as nanocatalyst was monitored by UV-VIS spectroscopy. Toxic MO was completely reduced in 105 s with a rate constant (k) 0.0386 s−1 using only 10 μg of the PBA nanocatalyst. Besides the powerful catalytic activity, the nanocatalyst also showed excellent stability and recyclability for ten consecutive cycles, with no significant decrease in the catalytic performance. Therefore, the proposed PBA is a promising, stable, cost-effective, and eco-friendly nanocatalyst for the rapid elimination of hazardous azo dyes.
6 April 2025 in Analytica Chimica Acta
1 November 2024 in Journal of the Electrochemical Society
AAAmal M. Abou Al-Alamein
The prevalence of cancer worldwide has prompted efforts to develop and produce a range of electrochemical biosensors for cancer diagnosis. Efficient cancer diagnosis can be enhanced by the sensitive detection of biomarkers, which can also lower the cost of medical diagnostics. Neuroblastoma is an embryonic cancer arising from neural crest stem cells and is considered the most common malignancy in infants and the extracranial solid tumor in children. In this paper, we describe the construction of a nanoparticle-modified electrochemical sensor for detecting and quantifying homovanillic acid (HVA), a biomarker for neuroblastoma. The electrooxidation of HVA was studied at a carbon paste electrode (CPE) modified with nickel-doped zinc oxide nanoparticles (Ni-ZnO NPs). The use of these nanoparticles enhanced electrochemical sensitivity and the electrocatalytic activity. The differential pulse voltammetric response of HVA was found to be linear in the concentration range of (3.96 × 10−6 to 3.83 × 10−5 M) with a lower detection limit of 1.01 × 10−6 M. The electrode demonstrated good stability in the HVA determination process, with a minor decrease in response after 10 weeks. The proposed sensor was successfully applied to determine HVA in a urine sample with a good detection result and a worthwhile biological impact.
12 January 2021 in Electroanalysis
10 January 2020 in Journal of the Electrochemical Society
The microfabricated potentiometric electrodes have been used in the field of medicine and biological sciences in the last few decades due to their various in-vivo sensing applications in addition to the cost effectiveness and easy processing. The proposed microfabricated electrodes use a low cost copper (Cu) substrate material on sensitized printed circuit board (PCB) which is easily patterned and compatible with the microfabrication processing. In this study, we further introduce the chemically prepared poly(3-octylthiophene) (POT) as an ion-to-electron transducer layer between the microfabricated Cu electrode and the ionophore-doped ion-selective membrane. The incorporation of POT reduced the potential drift from ∼7 mV h −1 for bare Cu electrodes to ∼1 mV h −1 for POT modified Cu electrodes because of its hydrophobic nature. In addition, the dynamic response time was obviously decreased from (11 ± 7 s) to (3 ± 2 s) due to the fast transduction. Furthermore, ionophore screening has been performed using calix[6]arene and calix[4]arene to enhance the membrane selectivity towards neostigmine (NEO) as a model drug analyte. The proposed sensors showed higher sensitivity, lower LOD when compared to the ionophore-free membrane. The incorporation of calix[4]arene ionophore improved the selectivity towards NEO in the presence of its potential impurities.
2 July 2024 in BMC Chemistry
One of the biggest issues affecting the entire world currently is water contamination caused by textile industries’ incapacity to properly dispose their wastewater. The presence of toxic textile dyes in the aquatic environment has attracted significant research interest due to their high environmental stability and their negative effects on human health and ecosystems. Therefore, it is crucial to convert the hazardous dyes such as methyl orange (MO) azo dye into environmentally safe products. In this context, we describe the use of Copper Nitroprusside Chitosan (Cu/SNP/Cts) nanocomposite as a nanocatalyst for the chemical reduction of azodyes by sodium borohydride (NaBH4). The Cu/SNP/Cts was readily obtained by chemical coprecipitation in a stoichiometric manner. The X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FT-IR) spectroscopy were applied to investigate chemical, phase, composition, and molecular interactions. Additionally, Scanning electron microscope (SEM) was used to examine the nanomaterial's microstructure. UV–vis spectroscopy was utilized for studying the Cu Nitroprusside Chitosan's catalytic activity for the reduction of azodye. The Cu/SNP/Cts nanocomposite demonstrated outstanding performance with total reduction time 160 s and pseudo-first order constant of 0.0188 s−1. Additionally, the stability and reusability study demonstrated exceptional reusability up to 5 cycles with minimal activity loss. The developed Cu/SNP/Cts nanocomposite act as efficient nanocatalysts for the reduction of harmful Methyl orange azodye.